Interior
- Forward stateroom (Pullman berth, port side, w/ drawer, shelf, locker storage)
- Salon
- Nav desk (port)
- Galley (starboard)
- Quarterberth (starboard aft, double berth w/ shelf + locker)
- Head (port forward of mast, full tub + shower)
- Settee berth sleeps 2
TODO: berth dimensions (Pullman, settee, quarterberth, head) when measured.
Battery bank lives in the salon under the starboard settee, amidship (relocated from aft lazarette).
- Why moved: thermal stability for lithium (cold lazarette caused router/heater dropout cascade), shorter DC runs (5–8 ft vs 20+ ft), shorter shore power runs.
- Cluster layout: 3 clusters of 3 batteries each, 4-way bus bar per cluster, single system bus bar combining clusters, 4/0 cables of identical length within a cluster.
- MPPTs stayed in lazarette — close to panels, single 1/0 run from the lazarette feed bus to the DC main.
- King StarBoard panel + straps; main earth ground in front of companionway.
- Nav desk: Pis (NAS, manager, Jellyfin), 5V rail, anchor alarm, starboard divider, USB SSD on OpenPlotter. See Nav and Entertainment for the media/network stack.
- HVAC controls panel on the bulkhead next to the media wall (see HVAC).
-
Stove: marine stove from a defunct Dutch brand — parts now self-fabricated:
- Pivot blocks: 3D-printed (or machined from Delrin rod, drilled and tapped to M5/M6)
- Burner caps: pending duplication via Xometry / Fictiv from CAD measurements
- Sink rebuild pending (see Plumbing)
- Icebox compressor install pending
- Galley shelf for compressor compartment pending
- Dual faucets pending: washing w/ mixer + dedicated drinking
- New sink — possibly one of the spare brand-new sinks from a previous project (fitment ❓), otherwise source one
- Quarterberth: catch-all currently — cleanup pending
- "Stuff with no home" plan: keep it light, find homes during refit
- Clean up quarterberth
- Repair & re-install cockpit table (see Hull-Deck)
- Mount Kennedy quote
- Cutting board → galley hook hanger
- Bug screens
- Mop wood with Murphy's