Repository navigation
Signals
A powered rail that is not powered is a red signal. Every train, manual or automatic, stops just in front of it and waits. Power the rail (lever, button, redstone clock, daylight sensor…) and trains go again.
lever
│
════════════P════════════ P = powered rail
lever off → red, trains stop before P
lever on → green, trains pass
Powered rails have no other effect on Tiny Trains: they don't boost or slow the train.
Trains press detector rails just like minecarts do. The rail powers up as soon as any part of the train is over it, stays on while the train passes, and switches off about a second after the last car has left. A train standing on a detector rail, or a parked coach, keeps it on.
═══════════D═══════════════P═══════ D = detector rail, P = powered rail (signal)
│
└── redstone ──→ door, lamp, bell, or a signal further down the line
Comparators next to a detector rail read 0 for trains, since trains have no inventory to measure.
Ideas:
- A lever at a depot to hold trains until you're ready.
- A daylight sensor so a line only runs by day.
- A redstone clock for a fixed departure rhythm.
- An observer or a pressure plate on a platform so a train waits for a player to step on.
- A detector rail before a level crossing that closes the gates while a train goes by.
- A detector rail at a platform that rings a bell or lights the lamps while a train is in.
← Junctions and Routing · Home · Safety →
Report a bug · Tiny Trains © pvvlvz, All Rights Reserved