Resin (SLA) Printer Tutorial
Resin printers, or SLA (stereolithography) printers, are a type of 3D printer that uses UV light to solidify a liquid resin into a solid model. Because they use light, resin printers can have much higher precision than FDM or filament-based printers. Resin printers are ideal for miniatures, keycaps, and other small, high-detail parts.
The typical precision of our Elegoo Mars 3 is 0.1mm to 0.05mm in the Z direction and 0.035mm (35um) in the X and Y directions. Some resins suffer from shrinkage so their accuracy may not be as high as FDM printers.
This tutorial assumes a basic familiarity with PrusaSlicer and FDM printers.
Important: The resin printer setup at Seattle Makers is not yet ready for member use. Resin printers require unique safety precautions and they will require a certification and PPE to operate. If you absolutely NEED to print something RIGHT NOW, ask Sam K. for guided use.
We will use PrusaSlicer to slice the 3D files, and another software called UVTools to export them to the printer.
Install UVTools (copy winget command into terminal)
Now we'll install the printer we are using into PrusaSlicer.
Open PrusaSlicer and install the Prusa SL1 printer in the config menu.
Close PrusaSlicer and open UVTools.
Go to Help -> Install profiles into PrusaSlicer.
Select all print profiles. Select "Elegoo Mars 3" under Printer Profiles. Install the profiles.
Re-launch PrusaSlicer.
In the top-right corner, make sure "expert mode" is selected. Change the printer to "Elegoo Mars 3."
Before we open a file, we need to adjust some settings.
Select "Materials." Change "Exposure time" to 3 seconds and "Initial exposure time" to 10 seconds. Different types of resin may require different exposure times; seek the manufacturer's recommendations.
Select "Material printing profile." In both columns, set "Delay before exposure" to 0.5 seconds. Set "Tower hop height" to 5mm. Turn off "tilt".
Models in this tutorial are from "Kitsune Collection" by MZ4250 on Printables.com.
Save the file - sometimes PrusaSlicer can crash on import, and we don't want to lose any settings changes.
Return to the "Platter" and drag and drop your model file into the PrusaSlicer window. PrusaSlicer supports importing these file types: 3MF, STL, STEP, OBJ, AMF
Adjust the model's size to taste.
Rotate the model so there are no flat surfaces parallel to the buildplate. Resin printers don't like having to pull up a bunch of new material at once; the surface will be warped and the print may fail. Layer lines will be more visible as the printer has less resolution in the Z direction, but it's a tradeoff.
Make sure your settings are
