UP Squared Pro 7000
This page is for UP Squared Pro 7000 based products
Compatibility List:
- UP Squared Pro 7000 Edge
- UP Squared Pro 7000 Board
- Intel® Core™ i3-N305 / Intel Atom® x7425E / Intel® Processor N97 / Intel® Processor N50 (formerly Alder Lake N)
- Intel® UHD Graphics Gen 12
- Up to 16GB LPDDR5
- Up to 64GB eMMC
- 40Pin Header
- MIPI-CSI via 61Pin FPC connector
Full Specifications are available on up-board.org website.
This board includes a standard 40pin header as most of our UP series platforms.
More information can be found here: 40Pin Header
To check a summary of the I/O features for this board this is a I/O Matrix Overview
In order to facilitate the evaluation and use of the MIPI CSI-2 interface available onboard we provide a Camera Kit, which is available from our shop and a Tutorial (from our Downloads section) to help with the hardware and software setup.
To get started with the UP Squared Pro 7000, you will need the following:
- Monitor
- HDMI cable (or another video cable with a HDMI adapter)
- USB keyboard and mouse (use a USB hub should you need to connect more than 2 USB devices)
- PSU: 12V6A PSU (power cord sold separately) or 12V8A PSU (power cord sold separately)
Also, if you need to install/reinstall the operating system, please prepare the following:
- USB flash drive at least 8GB
The following setup procedures are for the UP Squared Pro 7000 based products, which do not come with operating system preinstalled.
You may also follow these procedures when you need to reinstall the operating system.
Software packages from the Intel Edge Software Hub are compatible and validated with our platform. Here are direct links to install the following software packages:
-
Edge Insights for Autonomous Mobile Robots (You can start from step 2 since you have already installed the operating system earlier)
Back to Spec-Matrix-Overview-Atom Page
