UP_Core_carrier_board_(high_speed_I

---

Warning: POWER OFF the UPCore board BEFORE plugging/unplugging a carrier board.

---

UPC-CRST01 Hardware Specifications

Specifications
PCIe Switch	1x 2 channel PCIe switch
Ethernet	1x Realtek RTL8111G-CG
HSIC	1x HSIC to USB to 3 USB ports (1x MiniCard, 2x connector)
Internal I/O ports	1x MiniCard 1x uSIM Card Reader 1x power LED (bottom side)
Edge I/O ports	1x RJ45 Ethernet port 2x USB2.0 x1 connector SDCard (pluggable at back side)
Operating Temperature	0 ~ 60ºC
Operating humidity	10%∼80%RH non-condensing
Form factor	56.5mm x 66mm
Certificate	CE/FCC Class A

Quick tests

Board detection in BIOS

Run your UPCore board with your UP-CRST01 carrier board attached. Including a USB keyboard and HDMI display. Press the Esc key and enter the BIOS settings. There, you will see something like:

 Carrier board Vendor: AAEON
 Carrier board Product: UP-CRST01 rev A0.2_0_0

Board detection in Linux

Open a terminal windows for your Linux distro (https://wiki.up-community.org/Software#Operating_Systems).

Check the dmesg log looking for CRST01 board:

dmesg | grep CRST01

You will see something like that:

[ 0.000000] ACPI: SSDT 0x000000005B880000 000024 (v01 AAEON UPCRST01 00000000 INTL 20160831)