Skip to content

Stacking_multiple_carrier_boards_on_UP_Core

Jump to bottom
AAEONAEU-SW edited this page Nov 25, 2020 · 1 revision

When you stack both CRST01 and CRST02 carrier board with UP core together, please adjust the jumper on either one carrier board to make the address different with each other. If you keep default 0X50 on CRST01, please adjust the address to 0X51~0X53 on CRST02. Vice versa.

  1. Keep default 0X50 on CRST01, adjust CRST02.
JP3 JP2 Address
2-3 2-3 0X50(Default)
2-3 1-2 0X51
1-2 2-3 0X52
1-2 1-2 0X53

Ex. 0X50->0X51

  1. Keep default 0X50 on CRST02, adjust CRST01.
JP2 JP1 Address
2-3 2-3 0X50(Default)
2-3 1-2 0X51
1-2 2-3 0X52
1-2 1-2 0X53

Ex. 0X50->0X52

NOTE: This wiki is the main source of documentation for developers working with (or contributing to) the UP products. If this is your first time hearing about UP, we recommend starting with our main UP website, and our UP community page.

UP Wiki

Home

Boards

Community Forums

Downloads

Shop

Clone this wiki locally