Skip to content

Verified_HATs

Jump to bottom
AAEONAEU-SW edited this page Nov 27, 2020 · 3 revisions

This is a list of HATs that have been verified as working with the UP/UP^2 boards.

NOTE This is NOT a definitive list, just a selection of HATs that have been verified so far by our users.

Please add other HATs here that have been tested with the UP board. Instructions on how to set up and use specific HATs on UP can be added with new pages linked here and under the Hardware section.

UP VERIFIED HATs

Manufacturer HAT Status Verified By Instructions Notes
Adafruit Capacitive Touch HAT (MPR121) Fully working Emutex How-To
Adafruit 16-Channel PWM / Servo HAT (PCA9685) Fully working Emutex How-To
Adafruit DC & Stepper Motor HAT (TB6612) Fully working Emutex How-To
Adafruit Triple-Axis Accelerometer (ADXL345) Fully working Emutex How-To
Adafruit High Accuracy I2C Temperature Sensor (MCP9808) Fully working Emutex How-To
Adafruit PiTFT 480x320 3.5" TFT (26 pin header) Partially working Björn Reichert How-To The touch-input feature has not been verified at this time
Adafruit PiTFT Plus 480x320 3.5" TFT (40 pin header) Partially working Björn Reichert How-To The touch-input feature has not been verified at this time
Adafruit PiTFT 320x240 2.8" TFT Partially working Emutex How-To The touch-input feature has not been verified at this time
Watterott RPi Display B+ 2.8" 320x240 Partially working Björn Reichert How-To The touch-input feature has not been verified at this time
Olmatic S.USV UPs & S.USV UPs mobile Fully working Aaeon How-To
Dexter Industries GrovePi HAT Fully working Emutex How-To
SNOC RPISIGFOX Shield Fully working Emutex How-To
PiFace PiFace Digital Partially Working LorenzoK How-To All the Outputs Works, but the pushbutton can't be read
XLoBorg Piborg.org Fully working LorenzoK Pending

UP^2 VERIFIED HATs

Manufacturer HAT Status Verified By Instructions Notes
Adafruit Capacitive Touch HAT (MPR121) Fully working Emutex How-To
Adafruit 16-Channel PWM / Servo HAT (PCA9685) Fully working Emutex How-To
Adafruit DC & Stepper Motor HAT (TB6612) Fully working Emutex How-To
Adafruit PiTFT 480x320 3.5" TFT (26 pin header) Partially working Björn Reichert How-To The touch-input feature has not been verified at this time
Adafruit PiTFT 320x240 2.8" TFT Partially working Emutex How-To The touch-input feature has not been verified at this time
PiFace Digital Fully working All works

NOTE: This wiki is the main source of documentation for developers working with (or contributing to) the UP products. If this is your first time hearing about UP, we recommend starting with our main UP website, and our UP community page.

UP Wiki

Home

Boards

Community Forums

Downloads

Shop

Clone this wiki locally