Assembly | Over String Pickup Mount

Step 1: Install Heat Set Inserts

Step 2: Install Pickup

Make sure you attach the wires before you screw in the pickup. There are Zip Tie mount points inside the mount to prevent the wire from hitting the strings.

Step 3: Place Module

Step 4: Screw In Module

Important Note:

Once the strings are in place, you will need to check to make sure that the strings are not too close to the Pickup. If they are, remove the screws and insert washers below the Over String Pickup Mount until the strings are as close as they can be to the pickup without hitting it. You will likely need more washers on the side with the thicker strings.