Assembly | WingSet | Hex Splat

⚠️ This wing set is a prototype and is not as polished as the others. Assemble at your own risk.

ℹ️ This wing set requires a 2020 cut to 970mm and not 930mm

Step 1: Heat Set Inserts

Using a soldering iron, insert the top and bottom heat set inserts

Step 2: Strap Mounts

Put together the Strap mount assemblies

Strap 3: Glue in face plates

Step 4: Attach to core

Step 5: Electronics

Step 6: Optional Pickups

If you would like to attach either the Lace Ultra Thin Pickup or the Over String Pickup Mount to this WingSet, you will need to print and install the Pickup Core.