Assembly | Wiring Harness

Step 1: Crimp spade connectors on the jack wires

Crimp one 5mm spade connector onto each wire of a male JST 2 pin connector

Step 2: Attach the Jack wires to the Jack

Step 3: Crimp spade connectors onto the Potentiometer Wires

Step 4: Attach the Potentiometer wires to the Potentiometer

Step 5: Remove existing wires from Peizo Mic

Using a soldering iron or a pair of snips, remove the existing wires from the Peizo mic, making note of which wire was soldered where

Step 6: Solder new Peizo wires