Assembly | Prepare Hardware

These steps can be skipped if you purchased the DIY Kit.

Prepare 2020

Step 1: Cut 2020

Using a Chop Saw or a Hack Saw, cut the 2020 to 930mm length.

Step 2: Tap 2020

Using a M6 tap, tap both ends of the 2020.

Step 3: 5 String Adjustment Screw Hole

ℹ️ You don't need to do this if you are printing a 4 String bass.

Step 3a: Place Jig

Step 3b: Secure Jig with M6 Screw

Step 3c: Drill M5 Hole through 2020

Step 3d: Remove Jig

The end result should look like this

Prepare M3 Threaded Rod

Step 1: Cut M3 Threaded Rod

Using an Angle Grinder or a Hack Saw, cut your 2x 1000mm M3 Threaded Rods to 650mm