Assembly | WingSet | CW2

Step 1a: Insert Strap Connector Heat Set Inserts

Step 1b: Insert Pickup Mount Heat Set Inserts

ℹ️ This is optional, if you don't want to use the Over String Pickup Mount or the Lace Ultra Thin Pickup you can skip this step.

Using a soldering iron, insert the Strap Connector Heat Set Inserts.

Step 2: Put together body pieces

Position the top pieces on top of the back pieces.

Step 3: Screws

Then screw it all together using the BT3x20 screws

Step 4: Attach Core

Step 4a: Position 2020

Step 4b: Insert T Nuts

Step 4c: Attach body to T nuts with screws

Step 5: Control Panel

Step 6: Electronics

Step 7: Close Control Panel

Step 8: Strap Buttons

Step 8a: Install top Strap Button

Step 8b: Instal bottom Strap Button

Step 9: Install Pickup (Optional)

• Install Ultra Thin Lace Pickup
• Install Over String Pickup Mount