FAQ

What is a "Tensioned Part"

A "Tensioned Part" is a part of the bass that directly contacts the strings and therefore needs to be made stronger because of this.

What Filament can I use? (I have an enclosed printer like a X1C)

PCTG, ABS, ASA, PC, PAA, and PET have all been tested and work for Tensioned Parts.

Any filament can be used for the other parts

What Filaments can I use? (I have an A1)

PCTG is the ONLY recommended filament that can be printed on an open-air printer for Tensioned Parts

Any filament can be used for the other parts

What are the Recommended Print Settings?

All files are provided as .3mf files which have been plated and configured. However, if you happen to lose the settings when changing the printer in the slicer, here is the basic settings.

Settings for Tensioned Parts:

• Walls: 6
• Infill: 75% Adaptive Cubic
• Layer Height: 0.28

Settings for other parts

• Walls: 3
• Infill: 25% Adaptive Cubic
• Layer Height: 0.28