-
Notifications
You must be signed in to change notification settings - Fork 1
AD40xx Platform Build uboot
As a prerequisite the hdl must be built and referenced when creating a custom version of uboot.
-
Open a shell (Ctrl+Alt+T)
-
Setup up the environment for the Bootloader build.
$ ~/intelFPGA_lite/18.1/embedded/embedded_command_shell.sh
-
Launch bsp-editor
$ bsp-editor
-
Create a new BSP
File --> New HPS BSP
-
Reference the Preloader settings directory
Navigate to the /home/soceds/ad40xx/hdl/projects/ad40xx_fmc/tei0022/hps_isw_handoff/system_bd_sys_hps directory. Select "Open", then select "OK".
![](https://github.com/ArrowElectronics/data-storm-daq/raw/master/images/hps_isw_handoff.png)
-
Generate the Preloader
Select "Generate" to create the Preloader project. Select "Exit" to close bsp-editor.
-
Build Preloader
$ cd /home/soceds/ad40xx/hdl/projects/ad40xx_fmc/tei0022/software/spl_bsp $ make
-
preloader-mkpimage.bin is located in the spl_bsp directory
-
Build uboot
$ make uboot
-
u-boot.img is located in the spl_bsp/uboot-socfpga directory
Next - Build Linux / Devicetree
OR
Return to Build the Example Design
Return to AD40xx Platform User Guide
Information on this site was obtained from |
|
Please click Here to purchase platform boards
Arrow Data Storm DAQ Development Platform
Introduction
Developer Starter Guides
Additional Developer Docs
AD40xx Platform User Guide
AD7768 Platform User Guide
AD7768-1 Platform User Guide
AD7606B Platform User Guide
AD738x Platform User Guide
AD469x Platform User Guide
AD463x Platform User Guide
ADRV9001/2 Platform User Guide