AD463x Platform FPGA Architecture UP_AXI

All the FPGA IP cores contains multiple AXI register map modules, which control a well specified part of the IP. To avoid complicated interconnections inside the IP, using the up_axi module, the AXI Memory Mapped interface is converted into a so called Microprocessor interface or uP interface. This interface has an independent write and read channel, and each channel contains an address bus, a data bus, a request (driven by master) and an acknowledge (driven by slave) control signals. All the uP interface signals names have a up_ prefix, this differentiate themselves clearly from other internal signals.

Files

Name	Description
up_axi.v	Verilog source

Interfaces

Name	Type	Description
#Clock and reset
up_clk	input	Clock signal, should be connected to s_axi_aclk
up_rstn	input	An active low reset, should be connected to s_axi_aresetn
#Read interface
up_rreq	output	Read request from the processor
up_rack	input	Read acknowledge from the core
up_raddr	output[13:0]	Read address defined by the processor
up_rdata	input[31:0]	Read data,delivered by the core
#Write interface
up_wreq	output	Write request from the processor
up_wack	input	write acknowledge from the core
up_waddr	output[13:0]	Write address defined by the processor
up_wdata	output[31:0]	Write data defined by the processor

---

Return to AD463x FPGA Architecture

Information on this site was obtained from