-
Notifications
You must be signed in to change notification settings - Fork 1
Run the Demonstration Standalone (AD7606B)
The DataStorm DAQ development kit is designed to run as a standalone desktop computer. Connect a keyboard, mouse and HDMI display to operate in this mode.
![](https://github.com/ArrowElectronics/data-storm-daq/raw/master/ad7606b/ad7606b_platform_Int_digilent.png)
The AD7606B Evaluation Platform in this configuration is comprised of the following components:
- Analog Devices EVAL-AD7606BFMCZ data converter board
- DataStorm DAQ (Trenz Intel® Cyclone® V SoC TEI0022 Development Board ) (includes 12VDC power supply)
- Digilent® Analog Discovery 2 Signal Generator with dual outputs
- Digilent Discovery BNC adapter board
- One (1) BNC Male to SMB Female Cable
- Monitor with HDMI input
- HDMI cable
- Keyboard and Mouse with USB connectors
Select the SD card as the boot source for the processor.
The FMC_VADJ power rails provide power to the EVAL-AD7606BFMCZ via the FMC interface. This is an adjustable voltage. It must be set to 3.3V. Modify the VID_SW DIP switch settings to select 3.3V.
![](https://github.com/ArrowElectronics/data-storm-daq/raw/master/images/vid_sw_3p3.png)
![](https://github.com/ArrowElectronics/data-storm-daq/raw/master/images/datastorm_daq_vid_3p3.png)
Follow the steps in the order shown below.
- Insert the Micro SD card into the SD card slot
- Insert the EVAL-AD7606BFMCZ FMC connector into the FMC mating connector on the DataStorm DAQ board
- Attach the monitor to the DataStorm DAQ using an HDMI cable
- Attach the keyboard and mouse to the DataStorm DAQ using any of the 4 USB ports
- Connect the Signal Generator to the EVAL-AD7606BFMCZ SMA connectors
- Ensure that Jumper JP5 is removed, Jumper JP1 is in position A to remove standby, Jumper JP6 is in position B to get internal voltage reference on AD7606B, JP3 in position B, and Jumper JP2 is in position A to get +12V from FMC on the EVAL-AD7606BFMCZ board, for it to be powered via the FMC connector.
- Connect the power supply to the DataStorm DAQ
- Plug the AC-DC adapter into an AC outlet
The Analog Discovery 2 is used as a signal generator to drive the AD7606B input.
Install (if not already done) the Digilent WaveForms App.
Open the WaveForms App and Click on Wavegen in the left margin which opens a waveform widow
![](https://github.com/ArrowElectronics/data-storm-daq/raw/master/ad7606b/ad7606b_wavegen.png)
Click on Channels and select 1
Select Type as Sine
Select Frequency or Period
Set Amplitude to 1V
Set Offset to 1V
Click Run All
Power up the unit using this hardware configuration. Wait approximately 60 seconds for the unit to be fully functional.
IIO Oscilloscope will be automatically launched on the system desktop. No configuration is required.
Select a Plot Channel to be displayed in IIO Oscilloscope. Click on the check box in the Plot Channel window adjacent to voltage0. Right click on axi-ad7606-adc in the Plot Channels window. Select voltage0 and rising edge as the trigger parameters.
Select an appropriate number of Time Domain samples in the Plot Type window. Press the Capture / Stop button to begin the capture process.
Change the capture mode to Frequency Domain. Select an FFT Size and Average. Press the Capture / Stop button to begin the capture process.
Right click in the IIO Oscilloscope plot area. Select Single Tone markers. Press the Capture / Stop button to begin the capture process with markers.
Note the information in the Marker window. This capture shows a signal source of 10 khz with harmonic components.
The LibIIO library API enables access to the converter data from C code, Python code, or MATLAB. A small sample of C and Python codes are provided for the reader and can be run natively on the DataStorm DAQ.
-
Open a Terminal Emulator. Double click on the 'Terminal Emulator' icon on the Desktop
$ cd examples/python-examples $ thunar
-
Review the Python source code
- Double click on the file ad7606b-fmcz.py to review in the text editor - Select your preferred channel to obtain readings from that specific channel
-
Run the Python source code
$ python3 ad7606b-fmcz.py
This capture shows a signal source of 10 kHz with harmonic components.
-
Open a Terminal Emulator. Double click on the 'Terminal Emulator' icon on the Desktop
$ cd examples/c-examples $ thunar
-
Review the C source code
- Double click on the file ad7606b-iiostream.c to review in the text editor - Select your preferred channel in the CHANNEL_NUMBER constant to obtain readings from that specific channel
-
Compile the C source code (Use -liio flag to dynamically link the LibIIO libraries)
$ gcc ad7606b-iiostream.c -o ad7606b-iiostream -liio
-
Run the C executable
$ ./ad7606b-iiostream
-
Power down the target. Launch a Root Terminal. Type the following
$ poweroff
-
Wait 30 seconds and then you can safely power down the DataStorm DAQ
Please click Here to purchase platform boards
Arrow Data Storm DAQ Development Platform
Introduction
Developer Starter Guides
Additional Developer Docs
AD40xx Platform User Guide
AD7768 Platform User Guide
AD7768-1 Platform User Guide
AD7606B Platform User Guide
AD738x Platform User Guide
AD469x Platform User Guide
AD463x Platform User Guide
ADRV9001/2 Platform User Guide