Skip to content

CAT Share WSJT X JTDX

SP5XTF edited this page Nov 18, 2026 · 2 revisions

CAT Share (WSJT-X, JTDX)

Wersja polska

CAT Share lets other programs control the radio through this app (the only owner of the serial port).

  1. Configuration (⌘,) → CAT Share → turn on the rigctl server 127.0.0.1:4532. The switch states (server, “Allow PTT”) are remembered – after restarting the program the server turns on by itself.
  2. In WSJT-X: Settings → Radio:
  • Rig: Hamlib NET rigctl, Network Server: 127.0.0.1:4532
  • PTT Method: CAT, Mode: Data/Pkt, Split Operation: Fake It or Rig
  1. WSJT-X audio: input and output USB Audio Device (the radio's codec).
  2. PTT from external programs requires Allow PTT.

A program disconnecting while transmitting always triggers TX0. The transmit time limit applies here too.

  • Other programs (RUMlogNG, loggers): in the rig settings choose the model “Hamlib NET rigctl”, host 127.0.0.1, port 4532 – not “Yaesu FT-710” (that model sends the radio's native CAT commands, which the server does not understand; the CAT Share log will then show a hint). Polling about every 500 ms is enough.
  • The extended rigctld format is supported too (commands prefixed with +, ;, | or ,, e.g. +f), used by newer Hamlib loggers – replies with field names as in the original rigctld.

← Contests – scoring and Cabrillo · Home · USB audio →

Clone this wiki locally