Skip to content

Display colours and 3D mode

SP5XTF edited this page Nov 3, 2026 · 1 revision

Display – colours and 3D mode

Wersja polska

The DISPLAY tab changes how the RF scope looks. Changes appear on the scope immediately and are remembered.

Waterfall colours: Classic, Turbo (SDR) (navy noise, signals from green to red – as in modern SDR programs), Inferno (purple → orange → white), Fire, Ocean, Green phosphor, Rainbow, Grayscale – click a palette preview. The change recolours the whole waterfall history at once. “Same palette for the audio spectrum” also applies it in the AUDIO SPECTRUM tab.

Modern scope: Fill with palette colours (Spectrum trace box) – under the trace, the waterfall palette colours by level, as in SDR programs. Peak hold – a thin, bright line of peaks, slowly decaying (about 6 s), restarted after tuning and a range change. In the On the scope box: a dB scale on the left of the spectrum (0 dB = top of the scale, marks every 10 dB – relative, as the radio gives no dBm levels), Time stamps (UTC) on the waterfall every few seconds (the interval follows the scroll speed) and a Band plan – a strip under the waterfall with IARU Region 1 segments: CW, digital, SSB, beacons, FT8 (+3 kHz from the dial frequency) and broadcast bands. The RF scope waterfall has the radio's full resolution (850 points) and a longer history. A view of the whole 0–64 MHz range, as in SDR receivers, is not possible – the FT-710 only provides its own scope data.

Spectrum line: spectrum height as a share of the scope (the rest is the waterfall), line colour, fill under the line.

Display mode

  • 2D – waterfall – spectrum line and waterfall (as before).
  • Scroll speed (fast / medium / slow / very slow) – shared by the 2D waterfall and the 3D view, the same as the “Waterfall” switch in the scope bar. At slow speeds each line is the maximum of the skipped frames, so short signals (e.g. CW) do not disappear.
  • 3D – perspective – the latest spectrum lines arranged in depth, coloured by signal height; you can see signals appear and disappear over time. Settings: depth (number of lines), peak height, perspective (narrowing into the distance).
  • In 3D, click tuning and the frequency cursor follow the front (newest) line; DX Cluster spot calls are at the top.
  • The 3D view is drawn in the background, at most about 15 times per second – it does not slow the program down. On a slower computer reduce the depth.

On the scope – call signs above the RF scope spectrum: the DX Cluster spots and POTA activations (green line) switches. The label background as the FT8 colours and alerts (watched, new entity, unconfirmed entity), ordinary – amber; a station already worked on this band – no purple. Details: the “RF scope and waterfall” topic.

Restore defaults – classic palette, 2D mode, spectrum 30% of the height.


← RF scope and waterfall · Home · Logbook, QRZ.com and map →

Clone this wiki locally