Skip to content

Logbook QRZ com and map

SP5XTF edited this page Nov 8, 2026 · 4 revisions

Logbook, QRZ.com and map

Wersja polska

Logging a QSO (LOG tab)

  • Type the call sign – after a moment QRZ data fills empty fields (name, QTH, grid). The mode follows the radio, RST follows the mode.
  • Press Enter or Log QSO. Frequency and band come from the radio, time is UTC (start = typing the first letter of the call).
  • Below the form you immediately see whether the station was worked before: NEW STATION, NEW BAND, NEW MODE or WORKED (this band and mode), plus the latest QSOs with it (date, band, mode, reports). Calls with suffixes (SP5XX/P) are matched to the base call.
  • The QSO being entered is kept: the call and other fields stay when you switch to another tab and back. When the same station is logged another way (FT8 after RR73/73, a QSO from WSJT-X, CONTEST), the form clears itself and shows “Logged … at … UTC”; a different call you are typing is left untouched.

Station card (right): location, distance (km/mi), bearing with compass direction and long path (LP), map with the great-circle path (zoom: + / − / ⟲ buttons, mouse wheel, pinch on the trackpad), DXCC/CQ/ITU data. Clicking a QSO in the table shows its station. The call sign in the table links to QRZ.com.

Logbook window (“Open logbook” button)

  • My call and My grid – needed for distance and ADIF fields.
  • QRZ.com – username and password (the password is stored in the macOS Keychain). Full data requires the “XML Logbook Data” subscription.
  • Editing a QSO: double-click it, use Edit… or right-click → “Edit…” (also in the table in the LOG tab). Call sign, UTC time, frequency (always in MHz, e.g. 144.176; kHz or GHz may be added – the log supports all bands from 2200 m to 3 cm, including QSOs made with other radios), mode, reports, name, QTH, grid, country and notes can be changed; “Fill from QRZ” fills empty fields. Other ADIF fields (e.g. QSL confirmations from an import) stay unchanged.
  • Right-click a QSO (logbook window and the table in the LOG tab):

– Fill from QRZ.com – for one or more selected QSOs fills only empty fields (name, QTH, grid, country, DXCC, CQ/ITU zones) and recalculates the distance; nothing is overwritten. A station operating away from its country (e.g. P4/WE9V from Aruba, FM/VE3DZ from Martinique): QRZ describes its home, so only the name is taken from QRZ, and the country, zones and continent come from the prefix before the slash (cty.dat), as in Club Log and LoTW; the QTH, grid and distance from the home address are not filled in, and the DXCC number is filled in by the LoTW confirmation. The same applies to the entry form and QSO editing. /P, /M and a district change (W1AW/4) are the same country.

– Send SPOT… – prepares a cluster command, e.g. DX 14025.0 DL1ABC CW 599 tnx QSO, switches to the DX CLUSTER tab and puts it in the command field. The spot is not sent automatically – adjust the comment and click “Send”.

  • Delete entire logbook… – requires typing the word DELETE; before deleting, the program saves a backup (logbook-przed-usunieciem-….json in the data folder).
  • QSL confirmations… (logbook window) – downloads confirmations and marks the QSOs:

– LoTW – login and password for the lotw.arrl.org website (not the TQSL certificate password) in “Online services…” → LoTW. Only confirmations new since the last time are downloaded, with the confirming station's data (DXCC entity, zones, locator – they fill empty fields).

– eQSL – the inbox (eQSLs from your contacts); the same credentials as for uploading. With several QTHs in eQSL the QTH Nickname must match.

– QRZ Logbook – QSOs confirmed in QRZ (API key; downloading requires a QRZ subscription).

– Club Log – log matches: a QSO is confirmed when the other station has also uploaded it to Club Log (±15 min; the same credentials as for uploading – application password and API key). Accepted for IOTA awards, not for ARRL DXCC, so they are not counted in the statistics. The DXCC number from Club Log's mapping also fills an empty field of the QSO.

– Import from an ADIF file – e.g. an export from HRDLog.net (this service has no confirmation download interface), a LoTW report or a file from another program; the fields LOTW_QSL_RCVD, EQSL_QSL_RCVD, APP_QRZLOG_STATUS are used.

– From the start – all confirmations, not only new ones (the first time; LoTW can take several minutes for a large log).

– Automatically once a day (on by default): 2 minutes after the program starts and then every hour the program downloads new confirmations from services last downloaded more than a day ago and lets you know with an alert, e.g. “5 new confirmations – LoTW · newly confirmed entity: Malawi” (clicking it opens the logbook window). Each service shows the time of the next download.

Matching as recommended by ARRL: call (also with /P), band and time ±30 min; the mode only decides between several matching QSOs. Confirmations without a QSO in the log are shown in a separate list.

  • The QSL column in the table: L – LoTW, E – eQSL, Q – QRZ, C – Club Log. The All / Confirmed / Unconfirmed filter next to the search. Only LoTW counts for the ARRL DXCC award – eQSL and QRZ can be added to the statistics in the confirmations window (“also count…”). Confirmations imported earlier from another program (the same ADIF fields) are recognised immediately.
  • QSO map… (logbook window) – your QSOs on a 3D globe (satellite imagery with terrain; zoomed out a globe – on Apple silicon Macs, on Intel a flat map). Rotate with the mouse or trackpad, zoom with the wheel, a pinch or the + / − / ⟲ buttons. Colours: band (as on the propagation map), mode (CW, phone, FT8, FT4, RTTY, other digital) or confirmation (LoTW, optionally eQSL/QRZ). Filters: band, mode, period (whole period, 24 hours, 30 days, 12 months, this year), continent, confirmed only. Great-circle lines from your station (with many points it is worth narrowing the filters). Location from the locator, otherwise the middle of the country from cty.dat (approximate points, semi-transparent; they can be hidden). Points are drawn as a single layer, so the map stays smooth even with thousands of QSOs; dense areas separate when zoomed in. A legend with counts, statistics at the bottom (QSOs, entities, continents, farthest QSO); clicking a point (at any zoom) – a yellow marker with a callout, details at the bottom and Edit….
  • Awards… (logbook window) – the DXCC, WAZ, WPX, VUCC, POTA tabs, all with the same layout: a summary at the top, a table with a column for each band (✓ – confirmed on the band, W – worked but not confirmed; an item in orange – no confirmation at all), the “Total” row, the “Not confirmed” filter, search, sorting (order, name, first QSO), Export CSV. Confirmation: LoTW, plus eQSL and QRZ if “also count…” is ticked.

– DXCC (ARRL) – entities in the mixed, phone (SSB, AM, FM, SSTV), CW, digital categories; worked out of all current entities, confirmed with the next threshold (100, 150… Honor Roll), the entity-band total for the DXCC Challenge (160–6 m). Entity from cty.dat (including portable calls; WAE entities such as IT9 count as their DXCC entity – Italy).

– WAZ (CQ) – 40 CQ zones: worked and confirmed out of 40, the list of missing zones and of zones without confirmation. Zone from the QSO's CQZ field, or from cty.dat if it is missing.

– WPX (CQ) – call sign prefixes by the WPX rules: SP5XTF → SP5, 3Z9X → 3Z9, S50A → S50, RAEM → RA0, W1AW/4 → W4, DL/SP5XTF → DL0; the suffixes /P /M /MM /QRP are ignored.

– VUCC (ARRL) – grid squares (4 characters) on bands from 6 m up; for each band the confirmed grids and the award threshold (6 m and 2 m – 100, 1.25 m and 70 cm – 50, higher – 25).

– POTA – parks hunted from the log (POTA_REF / SIG_INFO), with the date of the first QSO, the station and the bands; POTA does not need QSL confirmations.

– IOTA (RSGB) – islands from the IOTA field (e.g. EU-005), with confirmations; SOTA – summits (SOTA_REF), WWFF – nature areas (WWFF_REF) – counted from the log; references also from SIG/SIG_INFO saved by other programs.

– PGA – Polish gminas: QSOs with SP stations with a gmina code in the CNTY field (entered in the QSO edit window → Award references).

  • File and backups (the menu on the right above the table) – ADIF import and export, the iCloud backup (switch, “Back up now”, “Show in Finder”), restoring from a backup and deleting the whole logbook. Above the table remain: search and filters (first row) and Edit…, Delete…, Statistics…, QSO map…, Awards…, QSL confirmations… and Online services… (second row).
  • iCloud backup (on by default) – an extra copy off the Mac, in iCloud Drive, folder FT-710 Control/Kopie dziennika: a dziennik-YYYY-MM-DD.json file for each day (last 30 days) and dziennik-najnowszy.adi with the whole log in ADIF format – any logging program can open it, also on another computer. The backup is updated at most every 10 minutes after changes and when the program quits; an empty log never overwrites the backup. The iCloud menu: status of the last backup, Back up now, Show in Finder. Requires iCloud Drive to be on (System Settings → Apple ID → iCloud); on the first backup macOS may ask for access to iCloud Drive.
  • Restore from backup… – list of backups (state at the last start, before deleting, before restoring, daily backups from iCloud Drive) with date and QSO count, or any backup file. Add to logbook adds missing QSOs (duplicates are skipped), Replace logbook… replaces the whole logbook after confirmation – backing up the current state first.
  • ADIF import checks the file first and shows a preview: how many QSOs are new, how many are duplicates (listed with the QSO they match) and how many records are invalid. Only new QSOs are saved, after clicking “Import new”. Duplicate = same call, band, mode (SSB/USB/LSB count as SSB) and time within 10 minutes; records repeated within the file itself are detected too. The same rules apply to QSOs from WSJT-X and when adding a backup.
  • Deleting QSOs: select one or several (⌘/⇧ + click) and press Delete, the Delete… button or right-click → “Delete…” – with confirmation; a single QSO can also be deleted in the edit window (Delete QSO…). Deleting in services: if the QSO was uploaded to Club Log or QRZ Logbook, the confirmation window has “Also delete in services” ticked – the program deletes it there at once (Club Log: at most 10 QSOs at a time, more – manually in Club Log; QRZ: the QSO number remembered at upload, for older ones looked up in QRZ by call, band and time). LoTW by design does not allow deleting uploaded QSOs, and in eQSL and the other services they have to be deleted manually on the website – the window reminds you. Unticking the boxes deletes the QSO only from the program’s logbook. (The contest log has its own deletion – CONTEST tab.)
  • Search and filters above the table: search by call, entity and name; band, mode (CW, phone, FT8, FT4, RTTY, other digital), period (24 hours, 30 days, 12 months, this year) and confirmations – they combine. Sorting – click a column header (date, call, band, frequency, QSL, entity, locator, comment).
  • Statistics… – a summary (QSOs, unique stations, DXCC entities, days with QSOs, best day) and charts: QSOs by year, bands, modes, continents, UTC hours; period selection.
  • Award references in the QSO edit window: gmina (CNTY), IOTA, SOTA, WWFF, POTA – standard ADIF fields.
  • ADIF import and export (ADIF 3.1.4, with COUNTRY, DXCC, CQZ, ITUZ, DISTANCE).
  • Receive QSOs from WSJT-X / JTDX – in WSJT-X: Settings → Reporting → UDP Server 127.0.0.1, port 2237. Right after it is added the QSO is completed with QRZ/HamQTH data (name, QTH… – empty fields only; the locator from WSJT-X stays).

Data: ~/Library/Application Support/FT710Control/logbook.json (backed up at every start).

  • QRZ data while typing a call (log form, “Add QSO…”, SSTV/CW/RTTY, remote panel): name, QTH and locator fill in themselves. After the call changes (an incomplete “SP5X”, correcting the last letter) the previous call's data is removed and the new call's data comes in – fields you corrected by hand stay unchanged.

Adding a QSO manually (the log form on the main tab → Add manually…, with what is already entered in the form; or the log window → Add QSO…)

  • E.g. QSOs from a second radio on 2 m, 70 cm, 23 cm (or HF): call with QRZ/HamQTH, UTC date and time, band (160 m … 3 cm) with a suggested typical frequency for the mode (editable; the frequency must lie in the band), mode (also MSK144 and Q65), RST, name, QTH, locator (with it the QSO counts for VUCC), comment.
  • Propagation (ADIF PROP_MODE): repeater, satellite (with its name, e.g. QO-100 – required by LoTW), tropo, sporadic E, meteor scatter, EME, aurora, F2. My radio and power (MY_RIG, TX_PWR) – remembered, so for the second radio you enter them once.
  • Save and next – saves and clears the call, while date, band, mode and radio stay (handy for logging a series of QSOs). Saved as in the program's log: entity, zones, distance, upload to services.

← Display – colours and 3D mode · Home · Online services (LoTW, QRZ, eQSL, WRL…) →

Clone this wiki locally