Repository navigation
PSK31 and PSK63
SP5XTF edited this page Nov 8, 2026
·
1 revision
- The PSK tab: radio in DATA-U (the Set radio: DATA-U button), monitoring on (the decoder uses audio from the radio).
- Band buttons – PSK31 dial frequencies (e.g. 14.070, 7.040, 3.580 MHz); activity is within a few kHz above. Right click – back to the default.
- Click the station's signal in the spectrum (a thin line a few tens of Hz wide). AFC tunes precisely (it catches a few tens of Hz from the click).
- PSK31 / PSK63 – the speed (31.25 and 62.5 Bd); PSK63 is twice as fast and slightly less robust.
- Quality – the phase consistency of the signal (green bar). Squelch (50% by default; it opens when the quality holds for half a second – characters from that moment are not lost): below the threshold no text is printed – noise alone gives up to about 30%, so the screen does not fill with random characters. Lower the threshold for very weak signals.
- Macros ({CALL} = your call; pencil – edit) and a text field; you transmit on the receive frequency (where the red line is), so the other station finds you.
- Requires Enable TX, a radio connection and the “To radio (TX)” device in the AUDIO tab. The sent text appears in the receive window marked ».
- PSK needs a clean signal: set the level so that ALC does not move, and moderate power – overdriving widens the signal and disturbs neighbours.
Log (column on the right)
- As in RTTY and CW: call with QRZ/HamQTH, RST (empty – 599), logged as PSK mode (submode PSK31 or PSK63 – according to the chosen speed).
Generated from the built-in help of FT-710 Control 0.9.5-beta – do not edit here; changes go into the program (Help.swift) and tools/make_wiki.py. · Wygenerowane z pomocy programu – nie edytuj tutaj.
English
- Getting started
- Station profile
- VFO and tuning
- Filter, AGC and noise reduction
- Transmitting and safety
- RF scope and waterfall
- Display – colours and 3D mode
- Logbook, QRZ.com and map
- Online services (LoTW, QRZ, eQSL, WRL…)
- DX Cluster
- SSTV – images
- CW – decoder and sending
- Propagation
- RTTY – decoder and sending
- FT8 and FT4
- PSK31 and PSK63
- Tools: SWR sweep and who hears me
- POTA – Parks on the Air
- Alerts
- Contests – scoring and Cabrillo
- CAT Share (WSJT-X, JTDX)
- USB audio
- Remote operation
- Diagnostics
- Shortcuts
- Troubleshooting
- About
Po polsku
- Pierwsze kroki
- Profil stacji
- VFO i strojenie
- Filtr, AGC i redukcja szumów
- Nadawanie i bezpieczeństwo
- Skop RF i waterfall
- Ekran – kolory i tryb 3D
- Dziennik, QRZ.com i mapa
- Usługi online (LoTW, QRZ, eQSL, WRL…)
- DX Cluster
- SSTV – obrazy
- CW – dekoder i nadawanie
- Propagacja
- RTTY – dekoder i nadawanie
- FT8 i FT4
- PSK31 i PSK63
- Narzędzia: pomiar SWR i kto mnie słyszy
- POTA – Parki w eterze
- Alerty
- Zawody – punktacja i Cabrillo
- CAT Share (WSJT-X, JTDX)
- Audio USB
- Praca zdalna
- Diagnostyka
- Skróty
- Rozwiązywanie problemów
- O programie