Repository navigation
Remote operation
Control the radio from a browser (iPhone, iPad, any computer).
- Layout: one column on a phone; on an iPad in landscape and on a computer the scope is wide on the right and the controls on the left.
- Language PL / EN – a button in the corner (remembered in the browser); by default the program's language.
- Scope with tap-to-tune and station calls from DX Cluster and POTA – the same colours as on the program's scope (watched, new entity, unconfirmed; POTA with a green outline); tapping a call tunes the radio. Display depends on the “Stations on the scope” switches in the DISPLAY tab.
- Bands remember the last frequency and mode (in this browser); by default phone (LSB below 10 MHz, USB above), 30 m – CW.
- Radio: ATT, IPO, AGC, power (slider), in CW the radio's key speed (KS); collapsible sections Receive (AF, RF, SQL, NB and DNR with levels, DNF), Filter (NAR, width, IF shift, notch and contour with frequency), Transmit (MIC, PROC with level, AMC), Tuner and memories (tuner, TUNE, radio memory messages M1–M5). Next to the frequency: VFO B, A=B, A↔B, SPLIT.
- Log: call (QRZ data and “worked: N QSOs” as in the program), RST (empty – the mode default), name, QTH, locator, comment; frequency and mode from the radio; saved by the same function as in the program (upload to services per settings); a list of recent QSOs.
- FT8 / FT4: mode, decoding, band buttons (frequencies of the current mode), Hound; a list of the last 40 messages in the Mac's colours (“to me” highlighted). Tapping a message – call the station and enable TX (like a double-click on the Mac). Above the scope an RF / FT8 switch: choosing a band in the FT8 panel switches the scope to the FT8 waterfall (0–3000 Hz, the Mac's colours, RX and TX markers) – a tap sets RX, and with the “Tap: TX” switch – TX (like a click and Shift+click on the Mac); CQ, Enable/Disable TX, STOP; the next message, the QSO station, TX/RX Hz and the status are shown. Decoding and the signal – on the Mac (listening in the AUDIO tab must run). Transmitting – the same conditions as PTT (remote permission replaces “Enable TX”); when the browser disconnects, FT8 TX is turned off.
- CW (in CW mode): typed text and macros (CQ, 5NN, TU…; {MY} – your call, {CALL} – the call from the log), STOP.
- DX Cluster and Alerts: lists with the program's colours; tapping tunes the radio and puts the call into the log.
- Transmitting from the browser (PTT, CW, memory messages, TUNE) – the same conditions: “Allow remote transmit” and an encrypted connection (Tailscale/HTTPS); when the browser disconnects, CW and message transmission is stopped.
- Like an app: on iPhone Share → Add to Home Screen – the FT-710 icon and the panel full screen.
- Microphone (PTT): the browser asks for permission after tapping “Audio on”. Chrome on iPhone also needs system permission: Settings → Apps → Chrome → Microphone; in Safari the website permission: “aA” → Website Settings → Microphone.
- Hints and the sound test – collapsed under “Help and sound test”.
- REMOTE tab: set a password (min. 8 characters; stored in the macOS Keychain, like the program's other passwords) and turn the server on. The switch states (server, remote transmit, home network) are remembered – after restarting the program the server turns on by itself; if you leave “Allow remote transmit” on, an operator with the password can transmit right after the program starts.
- Once in Terminal:
tailscale serve --bg 8710. If Terminal answers “command not found: tailscale”, the Tailscale app did not add the command to the path – use the full path:/Applications/Tailscale.app/Contents/MacOS/Tailscale serve --bg 8710, or (Standalone version) install the command in the Tailscale app settings (command-line integration), or add an alias to~/.zshrc:alias tailscale="/Applications/Tailscale.app/Contents/MacOS/Tailscale". - On a phone with Tailscale open
https://<mac-name>.<tailnet>.ts.net, enter the password, tap “Włącz audio” (the browser page is currently in Polish only). - Transmit requires Allow remote transmit at the station.
Over the internet without Tailscale – Cloudflare tunnel (REMOTE tab)
- The phone only needs a browser (Safari) – no app and no account. On the Mac, once in Terminal:
brew install cloudflared(a free Cloudflare program). - The remote password must have at least 12 characters (the address is public). Start the tunnel – after a moment the
https://….trycloudflare.comaddress appears with a QR code (scan it with the iPhone camera), Copy and Open. Option “Start together with remote operation”. - The connection is encrypted (HTTPS): the microphone, PTT and transmitting work – on the same conditions as via Tailscale. After 5 wrong passwords login is blocked for 1 min, for further series 5 min, 15 min and 1 h.
- The address changes every time the tunnel starts; Stop the tunnel, turning off remote operation or quitting the program ends access. Traffic passes through Cloudflare's servers and the test tunnel has no availability guarantee – for permanent, everyday use Tailscale is more convenient. Both ways can run at the same time.
Home network access switch – address http://<mac-address>:8710: control, scope and listening. Without HTTPS the browser does not provide the microphone and the station rejects PTT.
Safety: PTT works only while the button is held; no signal from the browser for 0.5 s ends transmission at the station. One operator at a time; 5 wrong passwords block login for a minute.
iPhone: if you hear nothing, check the volume; the page also tries to play in silent mode.
- Computer layout (a browser window from about 1200 pixels wide): like the Mac program – bands and modes on the left, VFO, arc meters (S, PO, SWR, COMP, ALC, RX/TX) and a large scope in the middle, the radio (sections expanded) plus audio and PTT on the right; tabs at the bottom: Log, DX Cluster, FT8/FT4, CW, Alerts (the choice is remembered; the FT8 scope opens the FT8 tab). On a phone the layout is unchanged – panels one below another.
← USB audio · Home · Diagnostics →
Generated from the built-in help of FT-710 Control 0.9.5-beta – do not edit here; changes go into the program (Help.swift) and tools/make_wiki.py. · Wygenerowane z pomocy programu – nie edytuj tutaj.
English
- Getting started
- Station profile
- VFO and tuning
- Filter, AGC and noise reduction
- Transmitting and safety
- RF scope and waterfall
- Display – colours and 3D mode
- Logbook, QRZ.com and map
- Online services (LoTW, QRZ, eQSL, WRL…)
- DX Cluster
- SSTV – images
- CW – decoder and sending
- Propagation
- RTTY – decoder and sending
- FT8 and FT4
- PSK31 and PSK63
- Tools: SWR sweep and who hears me
- POTA – Parks on the Air
- Alerts
- Contests – scoring and Cabrillo
- CAT Share (WSJT-X, JTDX)
- USB audio
- Remote operation
- Diagnostics
- Shortcuts
- Troubleshooting
- About
Po polsku
- Pierwsze kroki
- Profil stacji
- VFO i strojenie
- Filtr, AGC i redukcja szumów
- Nadawanie i bezpieczeństwo
- Skop RF i waterfall
- Ekran – kolory i tryb 3D
- Dziennik, QRZ.com i mapa
- Usługi online (LoTW, QRZ, eQSL, WRL…)
- DX Cluster
- SSTV – obrazy
- CW – dekoder i nadawanie
- Propagacja
- RTTY – dekoder i nadawanie
- FT8 i FT4
- PSK31 i PSK63
- Narzędzia: pomiar SWR i kto mnie słyszy
- POTA – Parki w eterze
- Alerty
- Zawody – punktacja i Cabrillo
- CAT Share (WSJT-X, JTDX)
- Audio USB
- Praca zdalna
- Diagnostyka
- Skróty
- Rozwiązywanie problemów
- O programie