Repository navigation
Getting started
- Connect the FT-710 with a USB cable (USB socket on the back of the radio) and turn the radio on.
- On the radio set the CAT speed: MENU → OPERATION SETTING → GENERAL → CAT RATE = 38400.
- In the status bar (bottom of the window) choose the port. The radio creates two ports with similar names (e.g.
…C0and…C1) – CAT works on the first one. - Choose 38400 and click Connect (or press Enter).
Once connected, the frequency appears in the middle of the window and “Connected to FT-710” next to the tuning buttons. If you see “No response”, pick the other port of the pair or check CAT RATE.
Remembering: after a successful connection the program remembers the port and speed. With Auto checked (status bar) it connects by itself at start-up; if the radio is off, it waits and connects when the port appears. A manual “Disconnect” stops these attempts. The waterfall (RF scope) starts by default – if you turn it off, the program remembers that.
Polski / English is selected in the status bar. The change is immediate and does not disconnect the radio.
- Main window – radio panel and tool tabs.
- Logbook – full QSO list, ADIF import/export, station and QRZ settings.
- Help – this window (⌘?).
- Change the height of the bottom panel (tabs) by dragging the handle above the tab bar – the height is remembered. Double-click the handle or ⌥⌘B (View menu) collapses the panel to the tab bar alone; clicking a tab expands it again.
- Collapse the left column boxes (Band, Mode, RX DSP / Filter, AGC, NR Mac) by clicking their title – rarely used ones take no space; the state is remembered.
- When a column does not fit, a scroll bar is shown. In a low window the bottom panel gives room to the top by itself (VFO, meters, scope).
- Narrow window (from 1280 pt – fits a MacBook Air without an external monitor): VFO-B is shown as one row under VFO-A (frequency, mode, TX with SPLIT), and tabs that do not fit are in the MORE ▾ menu at the end of the bar (the selected one shows its name there).
Home · Station profile →
Generated from the built-in help of FT-710 Control 0.9.5-beta – do not edit here; changes go into the program (Help.swift) and tools/make_wiki.py. · Wygenerowane z pomocy programu – nie edytuj tutaj.
English
- Getting started
- Station profile
- VFO and tuning
- Filter, AGC and noise reduction
- Transmitting and safety
- RF scope and waterfall
- Display – colours and 3D mode
- Logbook, QRZ.com and map
- Online services (LoTW, QRZ, eQSL, WRL…)
- DX Cluster
- SSTV – images
- CW – decoder and sending
- Propagation
- RTTY – decoder and sending
- FT8 and FT4
- PSK31 and PSK63
- Tools: SWR sweep and who hears me
- POTA – Parks on the Air
- Alerts
- Contests – scoring and Cabrillo
- CAT Share (WSJT-X, JTDX)
- USB audio
- Remote operation
- Diagnostics
- Shortcuts
- Troubleshooting
- About
Po polsku
- Pierwsze kroki
- Profil stacji
- VFO i strojenie
- Filtr, AGC i redukcja szumów
- Nadawanie i bezpieczeństwo
- Skop RF i waterfall
- Ekran – kolory i tryb 3D
- Dziennik, QRZ.com i mapa
- Usługi online (LoTW, QRZ, eQSL, WRL…)
- DX Cluster
- SSTV – obrazy
- CW – dekoder i nadawanie
- Propagacja
- RTTY – dekoder i nadawanie
- FT8 i FT4
- PSK31 i PSK63
- Narzędzia: pomiar SWR i kto mnie słyszy
- POTA – Parki w eterze
- Alerty
- Zawody – punktacja i Cabrillo
- CAT Share (WSJT-X, JTDX)
- Audio USB
- Praca zdalna
- Diagnostyka
- Skróty
- Rozwiązywanie problemów
- O programie