Repository navigation
SSTV images
SSTV tab: receiving and sending images. The decoder and transmitter are part of the program (own code, no external programs).
Band buttons (tuning panel, 80–6 m): typical SSTV calling frequencies (3.733, 7.165, 14.230, 18.160, 21.340, 24.975, 28.680, 50.680 MHz); below 10 MHz DATA-L, above DATA-U – like phone. The program remembers the last SSTV frequency on each band; right-click – back to the default. Changing band stops transmitting.
Modes: Martin M1 and M2, Scottie S1 and S2, Robot 36, PD 90, PD 120, PD 180. The mode is detected automatically from the VIS header.
- Radio in USB (or DATA-U), typical frequencies: 14.230 / 21.340 / 28.680 MHz.
- Turn monitoring on (AUDIO tab or the button in the TUNING part) – the decoder uses the radio's audio.
- The image is drawn line by line; when finished it goes to the gallery (
Pictures/FT710Control SSTV, named with UTC date, mode and frequency).
- The decoder corrects mistuning up to about ±200 Hz and image slant (sound card clock differences) by itself.
- If a transmission stops halfway, the received part of the image is saved.
- Tuning: audio spectrum with markers SYNC (1200 Hz), 1500, VIS (1900 Hz) and 2300 Hz, plus a current tone indicator – the VIS header should fall at 1900 Hz.
Log (column on the right)
- Call with a QRZ/HamQTH lookup (name, QTH and locator fill in themselves; for a station away from home only the name), entity and “new station” or “worked: N QSOs”.
- RSV sent and received (595 by default): readability 1–5, strength 1–9, picture quality 1–5.
- The mode of the received picture (e.g. “SSTV Martin 1”) goes to the comment by itself.
- Log QSO (or ⌘↩) – SSTV mode, frequency from the radio, saved as in the program's log (entity, zones, distance, upload to services). For DXCC, SSTV counts as Phone (ARRL rules).
- An image from a file (Image…), the test pattern or the received image (Reply). The image is scaled to the mode's resolution (cropped), with an overlay: your call at the top and your own text at the bottom (e.g. “UR 595 TNX”).
- SEND requires a radio connection, Enable TX and the “To radio (TX)” device chosen in the AUDIO tab. PTT is keyed and released automatically.
- The image duration is checked against the transmit limit – PD 180 (about 188 s) needs the 5 min limit.
- STOP or withdrawing TX consent ends transmission immediately; it also ends if the radio stops transmitting (e.g. after the time limit).
- SSTV is a continuous carrier for 1–3 minutes – reduce power (e.g. 25–50 W) and set the level so ALC barely moves.
← DX Cluster · Home · CW – decoder and sending →
Generated from the built-in help of FT-710 Control 0.9.5-beta – do not edit here; changes go into the program (Help.swift) and tools/make_wiki.py. · Wygenerowane z pomocy programu – nie edytuj tutaj.
English
- Getting started
- Station profile
- VFO and tuning
- Filter, AGC and noise reduction
- Transmitting and safety
- RF scope and waterfall
- Display – colours and 3D mode
- Logbook, QRZ.com and map
- Online services (LoTW, QRZ, eQSL, WRL…)
- DX Cluster
- SSTV – images
- CW – decoder and sending
- Propagation
- RTTY – decoder and sending
- FT8 and FT4
- PSK31 and PSK63
- Tools: SWR sweep and who hears me
- POTA – Parks on the Air
- Alerts
- Contests – scoring and Cabrillo
- CAT Share (WSJT-X, JTDX)
- USB audio
- Remote operation
- Diagnostics
- Shortcuts
- Troubleshooting
- About
Po polsku
- Pierwsze kroki
- Profil stacji
- VFO i strojenie
- Filtr, AGC i redukcja szumów
- Nadawanie i bezpieczeństwo
- Skop RF i waterfall
- Ekran – kolory i tryb 3D
- Dziennik, QRZ.com i mapa
- Usługi online (LoTW, QRZ, eQSL, WRL…)
- DX Cluster
- SSTV – obrazy
- CW – dekoder i nadawanie
- Propagacja
- RTTY – dekoder i nadawanie
- FT8 i FT4
- PSK31 i PSK63
- Narzędzia: pomiar SWR i kto mnie słyszy
- POTA – Parki w eterze
- Alerty
- Zawody – punktacja i Cabrillo
- CAT Share (WSJT-X, JTDX)
- Audio USB
- Praca zdalna
- Diagnostyka
- Skróty
- Rozwiązywanie problemów
- O programie