Skip to content

Getting started

SP5XTF edited this page Nov 3, 2026 · 2 revisions

Getting started

Wersja polska

Connecting to the radio

  1. Connect the FT-710 with a USB cable (USB socket on the back of the radio) and turn the radio on.
  2. On the radio set the CAT speed: MENU → OPERATION SETTING → GENERAL → CAT RATE = 38400.
  3. In the status bar (bottom of the window) choose the port. The radio creates two ports with similar names (e.g. …C0 and …C1) – CAT works on the first one.
  4. Choose 38400 and click Connect (or press Enter).

Once connected, the frequency appears in the middle of the window and “Connected to FT-710” next to the tuning buttons. If you see “No response”, pick the other port of the pair or check CAT RATE.

Remembering: after a successful connection the program remembers the port and speed. With Auto checked (status bar) it connects by itself at start-up; if the radio is off, it waits and connects when the port appears. A manual “Disconnect” stops these attempts. The waterfall (RF scope) starts by default – if you turn it off, the program remembers that.

Language

Polski / English is selected in the status bar. The change is immediate and does not disconnect the radio.

Windows

  • Main window – radio panel and tool tabs.
  • Logbook – full QSO list, ADIF import/export, station and QRZ settings.
  • Help – this window (⌘?).

Home · Station profile →

Clone this wiki locally