Skip to content

Getting started

SP5XTF edited this page Nov 18, 2026 · 3 revisions

Getting started

Wersja polska

Connecting to the radio

  1. Connect the FT-710 with a USB cable (USB socket on the back of the radio) and turn the radio on.
  2. On the radio set the CAT speed: MENU → OPERATION SETTING → GENERAL → CAT RATE = 38400.
  3. In the status bar (bottom of the window) choose the port. The radio creates two ports with similar names (e.g. …C0 and …C1) – CAT works on the first one.
  4. Choose 38400 and click Connect (or press Enter).

Once connected, the frequency appears in the middle of the window and “Connected to FT-710” next to the tuning buttons. If you see “No response”, pick the other port of the pair or check CAT RATE.

Remembering: after a successful connection the program remembers the port and speed. With Auto checked (status bar) it connects by itself at start-up; if the radio is off, it waits and connects when the port appears. A manual “Disconnect” stops these attempts. The waterfall (RF scope) starts by default – if you turn it off, the program remembers that.

Language

Polski / English is selected in the status bar. The change is immediate and does not disconnect the radio.

Windows

  • Main window – radio panel and tool tabs.
  • Logbook – full QSO list, ADIF import/export, station and QRZ settings.
  • Help – this window (⌘?).

Window layout – smaller screens

  • Change the height of the bottom panel (tabs) by dragging the handle above the tab bar – the height is remembered. Double-click the handle or ⌥⌘B (View menu) collapses the panel to the tab bar alone; clicking a tab expands it again.
  • Collapse the left column boxes (Band, Mode, RX DSP / Filter, AGC, NR Mac) by clicking their title – rarely used ones take no space; the state is remembered.
  • When a column does not fit, a scroll bar is shown. In a low window the bottom panel gives room to the top by itself (VFO, meters, scope).
  • Narrow window (from 1280 pt – fits a MacBook Air without an external monitor): VFO-B is shown as one row under VFO-A (frequency, mode, TX with SPLIT), and tabs that do not fit are in the MORE ▾ menu at the end of the bar (the selected one shows its name there).

Configuration (program menu → Configuration…, ⌘,)

  • All settings in one window, with a description of each section: Station (profile, QRZ/HamQTH accounts), Radio and CAT (port, speed, automatic connection, transmit time limit), Scope and waterfall, Log and services (LoTW, eQSL, QRZ, Club Log, HRDLog, WRL), Alerts, CAT Share, Remote operation (with the Cloudflare tunnel) and Program (language, updates, settings backup, diagnostic report).
  • The former DISPLAY, CAT SHARE and REMOTE tabs are now Configuration sections. Operating settings (e.g. FT8 options, CW keying, DSP filters) also stay in the tabs where they are needed while operating.

Home · Station profile →

Clone this wiki locally