MegaDevice Binding

MegaDevice Binding

• Working as Switch, Dimmer, Number, String

In MegaDevice settings server string should be for example 192.168.0.1:8989 and any scriptname

In ports settings you should enable P+R mode.

To change port number use Openhub config file:

################################ Megadevice Binding #######################################
#
# IP address of a Http port for megadevice defaut value is 8989
megadevice:httpserverport=8585

The general principle:

{megadevice= mega password  : ip megaDevice : port number of megaDevice(for mega-328 is 0-13) : refresh interval"}

EXAMPLES

item:

Dimmer DimmedLight	"Dimmer [%d %%]"	{megadevice="sec:192.168.0.14:10"}

sitemap:

Slider item=DimmedLight

For adc values use Number

item:

Number ADCPort15 "ADC value port 15 of megaDevice 1: [%d]" {megadevice="sec:192.168.0.14:15"}

For temperature value use Number:

{megadevice="sec:192.168.0.17:0,dht11,t:30"}

where:

t- temperature

h- humidity. (not available for 1w)

sensors type:

dht11

dht22

1w

If you have problems with 00.0 instead temperature or humidity, you can use "r" parameter. In this case values from sensors comes unparsed(raw). You can parse it youself with rules.

item:

String MegaTempHumParse         "Parse string [%s]"        {megadevice="sec:192.168.0.17:3,dht,r:30"}

rule:

rule "Mega DHT Temp/Hum Parser"
when 
    Item MegaTempHumParse received update
then
    val parse = MegaTempHumParse.state.toString.split("/")
    val parsedtemperature = parse.get(0)
    val parsedhumidity = parse.get(1)
    var temperature = new Double(parsedtemperature)
    var humidity = new Double(parsedhumidity)

    postUpdate(TempDHT, temperature)
    postUpdate(HumDHT, humidity)

    if(temperature == 5.0){
       logInfo("Test", "5.0")
    }
end