Repository navigation
Command
Find Macs or mobile devices and send them MDM commands, now or at a time you choose. ✏️ Sends commands to devices.
The tool has two tabs at the top:
- Send Command: pick devices and send a command straight away.
- Scheduled Commands: queue a command to be sent later. See Scheduled Commands below.
To send the same command to devices on several Jamf Pro servers at once, use Broadcast Command.
-
Connect to Jamf Pro and click Connect →. The tool checks Read Computers and Read Mobile Devices, and whether the account has at least one computer command privilege and at least one mobile device command privilege. You only need the rows for the device type you use. Then click Continue → (or Proceed Anyway →).
-
Choose a Device Type: Mac Computers or Mobile Devices.
-
Choose a Search Mode:
-
By Name: type a name, serial number or username. Matching devices are suggested as you type. Pick one, or click Search to see every match. Wildcards work, for example
MBP*or*john*. - By Group: pick a smart or static group (Filter groups… helps), then click Load Members →.
Devices you've used recently are listed under Recent, so you can pick them again with one click.
-
By Name: type a name, serial number or username. Matching devices are suggested as you type. Pick one, or click Search to see every match. Wildcards work, for example
-
Tick the devices you want (All and None help with long lists). Click a device's ⓘ button to see its details. Then click Choose Command →.
-
Pick a command. Any fields it needs, such as a PIN, a message or a time zone, appear at the top so they're easy to find. Then click Review & Send →.
-
The review screen shows Send ""? with every target device. Destructive commands are marked in red, with the warning This command is irreversible. Erased data cannot be recovered. Click Send Command.
-
The results screen shows the devices the command was queued for, and any it couldn't be sent to. Send Another Command keeps the same devices so you can pick another command. Search Again keeps your connection, and Start Over goes back to the beginning.
Nothing is sent until you click Send Command on the review screen.

| Command | What it does |
|---|---|
| Send Blank Push | Sends a blank push to make the Mac check in with MDM |
| Lock Computer | Locks the Mac. A 6-digit PIN is required, to unlock it, with an optional message on the lock screen |
| Renew MDM Profile | Re-pushes the MDM enrolment profile, to fix MDM problems |
| Remove MDM Profile | Removes the MDM profile, unenrolling the Mac from MDM. Marked in red |
| Wipe Computer | Erases all content and settings. A 6-digit PIN is required. Marked in red |
| Download Updates | Downloads available software updates without installing them |
| Download & Install Updates | Downloads and installs available software updates |
| Enable Bluetooth / Disable Bluetooth | Turns Bluetooth on or off |
| Enable Remote Desktop / Disable Remote Desktop | Turns Screen Sharing (Apple Remote Desktop) on or off |
| Set Activation Lock | Sets the Activation Lock bypass code on the Mac |

| Command | What it does |
|---|---|
| Send Blank Push | Sends a blank push to make the device check in with MDM |
| Update Inventory | Asks the device to send an updated inventory |
| Lock Device | Locks the device, with an optional message and an optional 6-digit PIN |
| Clear Passcode | Clears the device passcode (supervised devices only) |
| Clear Screen Time Passcode | Clears the Screen Time (Restrictions) passcode |
| Restart Device / Shut Down Device | Restarts or shuts down the device |
| Wipe Device | Erases all content and settings, with an optional 6-digit PIN. Marked in red |
| Enable / Disable Voice Roaming | Turns voice roaming on or off |
| Enable / Disable Data Roaming | Turns data roaming on or off |
| Enable / Disable Bluetooth | Turns Bluetooth on or off |
| Enable / Disable Personal Hotspot | Turns Personal Hotspot on or off |
| Enable Lost Mode | Puts the device in Lost Mode, with an optional message and phone number |
| Disable Lost Mode | Takes the device out of Lost Mode |
| Play Lost Mode Sound | Plays a sound on a device that's in Lost Mode |
| Set Wallpaper | Sets the wallpaper on the lock screen and home screen |
| Set Activation Lock | Sets the Activation Lock bypass code on the device |
| Renew MDM Profile | Re-pushes the MDM enrolment profile |
| Set Time Zone | Sets the time zone. Pick it from a list grouped by region. Required |
| Recommend Software Update | Recommends a specific iOS or iPadOS version to install. Pick it from a list of iOS 17, 18 and 26 versions. Required |

Queue a command to be sent to chosen devices at a later date and time, for example a restart out of hours.
- On the Scheduled Commands tab, click Schedule Command.
- In Schedule a Command:
- Enter the Jamf Pro details under Credentials used when the command fires, or pick a Saved Server.
- Choose the Device Type and Command. If the command needs a message, phone number, PIN, time zone or version, fill it in. For a time zone or version, type the value, for example
America/New_Yorkor17.5. A PIN must be 6 digits, and Schedule Command stays unavailable until a required PIN or value is filled in. - Under Target Devices, search by name or serial number and tick the devices.
- Set the Scheduled Time. It must be in the future.
- Click Schedule Command.

Every scheduled command is listed with its command, device type, target devices, scheduled time and status. Filter by All, Pending, Running, Completed or Failed.
| Button | What it does |
|---|---|
| Run Now | Sends a pending command straight away |
| Cancel | Cancels a pending command and removes it |
| Remove from list | Removes a finished command from the list |
When a command finishes, its row shows Completed at …, or Failed with the reason.
Scheduled commands are sent by Magic Toolbox on this Mac, not by Jamf Pro.
- Magic Toolbox must be running at the scheduled time. Closing the window is fine, because the app keeps running in the menu bar.
- The app checks for due commands every 30 seconds, starting as soon as it launches.
- If the app wasn't running or the Mac was asleep at the scheduled time, the command is sent at the next check after the app is running again.
The Jamf Pro credentials for each scheduled command are saved in the macOS Keychain, this Mac only, until the command completes. They're deleted when the command completes, or when you Cancel or Remove it. The list itself (commands, device names and times, but no credentials) is kept in the app's preferences.
- Commands are queued by Jamf Pro. A device that's offline gets the command the next time it checks in. Use MDM Command Queue to see whether a Mac's commands completed or failed.
- Device Logs has a Send Command → button that opens Command with that device already selected.
- Wipe Computer, Wipe Device and Remove MDM Profile can't be undone from Magic Toolbox. Check the target list carefully. Keep a note of the PIN you set for Lock Computer and Wipe Computer: it's needed to unlock the Mac.
- To reinstall the Jamf management framework on a Mac, use Redeploy.
Read Computers (Mac Computers) or Read Mobile Devices (Mobile Devices). For By Group, Read Smart Computer Groups and Read Static Computer Groups, or the mobile device equivalents.
To send commands, the account also needs the Jamf Pro privilege for each command you use. These are under Jamf Pro Server Actions in the API role, for example Send Computer Remote Command to Lock Computer or Send Mobile Device Lost Mode Command. Download Updates, Download & Install Updates and Recommend Software Update also need the privileges for Managed Software Updates. The permission screen only checks that the account has at least one send privilege of each kind, not the one for each command. A missing privilege makes the command fail for that device.
Magic Toolbox © MDM Magic · mdmmagic.au · Releases · Report an issue
Getting started
Deployment
Jamf Pro Tools
- Clone
- Compare
- Wipe
- Restore
- Disable
- Create
- Command
- Broadcast Command
- Device Logs
- LAPS
- MDM Command Queue
- Redeploy
- Webhook Manager
- Self Service Descriptions
Audit & Health Check
- Profile Conflicts
- Smart Group Audit
- Account Audit
- Cert & Token Expiry
- Unused
- Network Check
- Script Auditor
- Fleet Health
- Extension Attributes
- Self Service Audit
- Stale Devices
- Profile Drift
- Policy Audit
- Patch Compliance
- Conditional Access
- Category Audit
- Pre-stage Audit
- Enrolment Funnel
Profile Builders
- PPPC Analyser
- System Extensions
- Web Content Filter
- Notifications
- Login Item Profiles
- Profile Signer
- Profile Unsigner
- Profile Inspector
- Uploading Profiles
Content & Packages
Reference