Analog_Sound_Sensor_SKU__DFR0034

Analog Sound Sensor SKU:DFR0034

Introduction

This is an updated version of the Analog Sound Sensor. Analog Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal by imitating the input interface. You may use it to make some funny interactive works such as a voice operated switch.

As one of our new version of breakout boards, we have improved the analog sound sensor in below:

Wide voltage range from 3.3V to 5V
Standard assembling structure (two 3mm holes with multiple of 5cm as interval)
Easily recognitive interfaces of sensors ("A" for analog and "D" for digital)
Icons to simplely illustrate sensor function
High quality connector
Immersion gold surface

Specification

Supply Voltage: 3.3V to 5V
Detects the sound intensity
Interface: Analog
Size:22x30mm

PinOut

center

Blue：Analog signal output

Red：VCC

Black：GND

Tutorial

Connection Diagram

Digital magnetic sensor Diagram

Sample Code

void setup()
{
  Serial.begin(9600); // open serial port, set the baud rate to 9600 bps
}
void loop()
{
      int val;
      val=analogRead(0);   //connect mic sensor to Analog 0
      Serial.println(val,DEC);//print the sound value to serial
      delay(100);
}