-
Notifications
You must be signed in to change notification settings - Fork 5
Breadboard_Plugin_Components_Pack_SKU_KIT0098
Angelo edited this page Sep 21, 2016
·
3 revisions
Breadboard-Plugin series is a new kit for breadboard experiment. It provides convenient, reliable and reusable components, plugins and modules. This innovative approach will solve the following issues when using a breadboard:
- The problem by using DIP type of components
- Hard to read the value (Resistor color codes)
- Severe deformations of the pin after used, non-reusable, not environment-friendly
- The pin diameter is too thin or too thick, poor match with the breadboard hole
- Confused the order of transistor “e”, “b”, “c” pins
- Usage problem: Most of sensors and actuators require 3 interfaces: Signal/VCC/GND, you have to use the jumper wire for the connection, messy and unreliable.
- ''' Easy to recognize ''': Resistance value, capacitance values, positive/negative polaron and pin functions are marked clearly.
- ''' Easy to learn ''': The circuit symbol is clearly visible, directly match the circuit diagram
- ''' Easy to use ''': Direct-plug pin
- ''' Easy to Plug/unplug ''': The 0.64mm diametral pin matches the breadboard hole perfectly
- ''' High-reliability ''': ENIG technology, the circuit connection is reliable and durable
- ''' Environment-friendly ''': Reusable and Environment-friendly
Breadboard-Plugin is designed by Maker LeoYan, produced and sold by DFRobot
![]() |
|---------------------------------------------------|
| **Description** |
| Package: 1206 |
| Resistance: 220R, 1K, 4.7K, 10K |
| Pins: 2 |
| Lead Pitch: 4x2.54mm (400mil) |
| Dimensions (without pins): 13.8 (w) x 11.4 (h) mm | |
![]() |
|---------------------------------------------------|
| **Description** |
| Package: 1206 |
| Capacitance: 22pF@50V,100nF(0.1uF)@50V,47uF@10V |
| Pins: 2 |
| Lead Pitch: 4x2.54mm (400mil) |
| Dimensions (without pins): 13.8(W) x 11.4(H) mm | |
![]() |
|------------------------------------------------------------|
| **Description** |
| Package: 1206 (PCB integrates current limiting resistance) |
| Color: Red (R), Yellow (Y), Green (G), Blue (B) |
| Pins: 2 |
| Lead Pitch: 4x2.54mm (400mil) |
| Dimensions (without pins): 13.8(W) x 14.5(H) mm | |
![]() |
|-------------------------------------------------|
| **Description** |
| Type: SS14 (Schottky Barrier Rectifiers) |
| Parameter: If=1A, Vfm=0.7V, Vr=40V |
| Pins: 2 |
| Lead Pitch: 4x2.54mm (400mil) |
| Dimensions (without pins): 13.8(W) x 11.5(H) mm | |
![]() |
|-------------------------------------------------|
| **Description** |
| Type: BC817-25 |
| Parameter: Vceo=45V, Ic=500mA, hFE=400 |
| Pins: 3 |
| Lead Pitch: 2x2.54mm (200mil) |
| Dimensions (without pins): 13.8(W) x 11.7(H) mm | |
![]() |
|-------------------------------------------------|
| **Description** |
| Type: BC807-25 |
| Parameter: Vceo=-45V, Ic=-500mA, hFE=400 |
| Pins: 3 |
| Lead Pitch: 2x2.54mm (200mil) |
| Dimensions (without pins): 13.8(W) x 10.7(H) mm | |
![]() |
|---------------------------|
| **Description** |
| Support 4 x 3-Pin modules |
| Dimensions: 15.2x16.2mm | |
- Breadboard Plugin Connector
- Circuit Schematic
- Breadboard
The kit supports following kinds of breadboard: *Breadboard 1: it is the default supported breadboard, can use it directly. *Breadboard 2: If using this kind of bread board, resolder Pin at "M" and solder the Pin to “L” or “R”.
- Usage tutorial
- Recognize the front and back
- Plug the back pins into Breadboard
- Plug the Module on the breadboard plugin board. (Please notice the power polarities)
There is no question about this product yet, if you have any problem or suggestions, you are welcome to email to us or post on our Forum! Thank you!
For any question/ advice/ cool idea to share with us, please visit DFRobot Forum or Email to Techsupport Team <techsupport@dfrobot.com>. |
get it from dfrobot store or dfrobot distributor