s_(SKU_SEN0031)
This is the breakout board for the IDG500, which includes an on-board 2.8V regulator and all pins broken out to 0.1" pin holes. The IDG-500 is a very small, dual-axis angular rate sensor (gyroscope). It uses InvenSense’s proprietary and patented MEMS technology with vertically driven, vibrating masses to make a functionally complete, low-cost, dual-axis angular rate sensor. All required electronics are integrated onto a single chip with the sensor. The IDG-500 gyro uses two sensor elements with novel vibrating dual-mass bulk silicon configurations that sense the rate of rotation about the X- and Y-axis (in-plane sensing). This results in a unique, integrated dual-axis gyro with guaranteed-by-design vibration rejection and high cross-axis isolation. It is specifically designed for demanding consumer applications requiring low cost, small size and high performance. The IDG-500 gyro includes the integrated electronics necessary for application-ready functionality. It incorporates X- and Y-axis low-pass filters and an EEPROM for on-chip factory calibration of the sensor. Factory trimmed scale factors eliminate the need for external active components and end-user calibration. This product is lead-free and Green Compliant.
-
3-7V single-supply operation
-
Integrated X- and Y-axis gyros on a single chip
-
Two separate outputs per axis for standard and high sensitivity:
-
X-/Y-Out Pins: 500°/s full scale range 2.0mV/°/s sensitivity
-
X/Y4.5Out Pins: 110°/s full scale range 9.1mV/°/s sensitivity
-
Integrated amplifiers and low-pass filters
-
Auto-Zero function
-
On-chip temperature sensor
-
High vibration rejection over a wide frequency range
-
High cross-axis isolation by proprietary MEMS design
-
Hermetically sealed for temp and humidity resistance
-
10,000 g shock tolerant
shopping gyro breakout board - idg500 dual 500°/s (sku:sen0031)
category: Product Manual category: SEN Series category: Sensors category: Modules