mdibl_partslist

MDIBL mesoSPIM: Partslist

Description

These parts are intended in addition to the mesoSPIM V5 parts. If the setup should be built in this configuration right away, the Hamamatsu Orca camera of the mesoSPIM V5 is not necessary.

Parts

The parts list is preliminary - total cost of non-custom parts is approx. $3.5k

Quantity	Component	Comment
1	Custom Aluminium Parts
1	ZWO Filter wheel 7x2"
1	LC6W	60 mm Cube
2	BBE2-E02 2" Elliptical Mirror	1st & 2nd fold mirror (DM1 & DM2)
1	Tube lens Mount (Edmund 11-149)	Tube lens
1	Olympus Wide field tube lens	Tube lens
1	PI/MICOS L-611 Rotation Stage	Turret stage
1	PI/MICOS C-863 Stage Controller with cables	Turret stage
1	L-509.2DG (L-509.033111) for the final version or M-111.2DG Linear Stage with cables for the cuvette (prototype)	Turret stage
1	KCB2EC/M 45 deg mirror mount	for the 2nd fold mirror
1	XT95B-250 Rail	For the Kinetix holder
1	XT95P13/M Clamp	For the Kinetix holder
1	XT95P13/M Clamp	For the Kinetix holder
1	Newport M-CXL95-120 Carrier	For the Kinetix holder
1	Newport M-CXL95-80 Carrier	For the Rotation Stage -> check
2	Newport M-CXL95-50 Carrier	Stoppers
1	VM05/1M Kinematic Mount	for the 1st fold mirror
1	12.7 mm window, 3 mm thick	for the 1st fold mirror
1	SM2NFM2 F-Mount Adapter	to connect the Kinetix
2	SM2A24 SM2 -> M42x1 Adapter	for the 1.1x & 4x objectives
1	M2M32S SM2 -> M32x0.75 Adapt.	for the 12x objective
1	RS2P/M 50 mm Post plus spacer	1st fold mirror mount
1	SM2L03 SM2 Tube	to connect the Kinetix
1	AM45C/M 45 deg mounting block	1st fold mirror mount
1	SM2CP2 Cap	for the empty position in the 60 mm cube
1	SM2L10 1 Inch SM2 Tube	for the 12x objective
1	TMA4	to connect tube lens to 2nd fold mirror
1	SM2T2	to connect tube lens to 2nd fold mirror
1	SM2V05	for the 12x objective
1	UBP3/M	to mount the Kinetix
1	UBP2/M	to mount the cuvette
8	P30/M 1.5 inch posts	to raise excitation paths