Analog_Rotation_Sensor_V1_(SKU__DFR0054)

Introduction

the dfrobot rotation sensor v1 is arduino compatible and can be rotated upto 300-degree. it is based on the potentiometer. with the Arduino sensor expansion board, in combination, it can be very easy to achieve position-dependent interaction with the rotating effect or produce MIDI instrument.

Specification

• Interface type: Analog
• 300 degree rotation sensor

Pin Definition

The definition of gas sensor pin is

1. Signal Output
2. GND
3. Power

Connection Diagram

Sample Code

// # Editor     : Lauren from DFRobot
// # Date       : 30.12.2011

// #
// # Editor     : Lauren from DFRobot
// # Date       : 17.01.2012

// # Product name: Rotation Sensor v1/v2 or Analog Slide Position Sensor
// # Product SKU : DFR0054/DFR0058/DFR0053
// # Version     : 1.0

// # Description:
// # the sample to drive some analog sensors

// # Connection:
// #        Signal output pin  -> Analog pin 0
// #


void setup()
{
  Serial.begin(9600);     //Set serial baud rate to 9600 bps
}
void loop()
{
  int val;
  val=analogRead(0);      //Read slider value from analog 0
  Serial.println(val,DEC);//Print the value to serial port
  delay(100);
}

shopping analog rotation sensor v1 (sku: dfr0054) category: Product Manual category: DFR Series category: Sensors category: Source category: Diagram