Repository navigation
Issues.00330
Summary: cev_plume_drive should only set flags for changes only
Created: 2011–03–22 11:27
Status: Released
Category: Request
From: frankie
Version: 2.1
Released_In: 2.2
Description:
right now, cev_plume_drive.tcl updates the plume flags any time the force nodes are updated. Since it is common for simulations to send out the force node values every cycle, this causes all of the plumes to get updated, which causes a cycle of comm to come out of all of the clients.
This is a request to only have the flags set if they are not already in the correct state.
frankie March 29, 2011, at 01:45 PM: Did this for cev_plume_drive.tcl and the dynamic_overlays.tcl which was driving the chutes nodes.
| commit | cd12f5f575818251482d72fea14632fda619ea5e [link] |
||
| Author: | Frank Graffagnino |
| Date: | Tue Mar 29 13:46:34 2011 -0500 |
| Message: | [@Issue 00330: Also did the changes only update for chutes in
dynamic_overlays.tcl @] |
Affected Files:
gui/dynamic_overlays.tcl | 47 ++++++++++++++++++++++++++++++++++±-----------
1 file changed, 35 insertions(+), 12 deletions(-)
| commit | 47646bc628e802822be906f25713e470816d9e98 [link] |
||
| Author: | Frank Graffagnino |
| Date: | Thu Mar 24 10:23:57 2011 -0500 |
| Message: | [@Issue 00330: Updated plume drive to set plumes on changes only
@] |
Affected Files:
gui/cev_plume_drive.tcl | 31 ++++++++++++++++++++++++++++±-
1 file changed, 29 insertions(+), 2 deletions(-)