Omron PLC HMI NX102 Connectivity with Edge Gateway

Omron PLC/HMI NX102 Connectivity with Edge Gateway

How to connect to the Omron NX102 controller using the Edge Gateway.

Connector type: Physical device connector — uses the OPC UA, Modbus TCP, or EthernetIP device driver and is added as a device connection on the Edge Gateway.

Capabilities of the NX102 Controller

The Omron NX102 has 2 available Ethernet ports. One port can be set as the OPC UA communication port; you can then use the second port as a Modbus TCP or EthernetIP port.

Specifics regarding the Omron NX102 communications capabilities can be found here: Omron NX102 specifications

The NJ and NX series controllers support the common protocols listed above, so you're able to utilize the off-the-shelf Edge Gateway drivers — Modbus TCP, OPC UA, and EthernetIP — in order to facilitate communications with the controllers.

Note: The original KB article includes two downloadable Omron manuals (w588_nj_nx-series_opc_ua_cpu_units_users_manual_en.pdf and W506-E1-24.pdf). Download them from the original article — they must be re-attached/linked in this repo.

See Also

• How-to-connect-OPC-UA-simulator-to-the-Edge-Gateway
• Fanuc-Robot-Connectivity-using-Edge-Gateway
• Edge-Connections-Complete-Industrial-Integration-Reference
• Edge-Gateway-Flows
• Fuuz-Connections-help-you-integrate-your-Systems-and-Devices

---

Source: support.fuuz.com