Creating a FlyingF4 from scratch
Murilo Pontes edited this page Jun 1, 2015
·
22 revisions
- Buy an STM32F4Discovery
- Buy a shield with MPU6050, HMC5883, MS5611: GY-86 is a good candidate
- Wiring
- Flash the bootloader
- Flash the firmware
- See lilvinz setup
You now have a fully functional FlyingF4. Enjoy!
Blink codes for the red LED
- 1 pulse - flash chip
- 2 pulses - MPU6050
- 3 pulses - HMC5883
- 4 pulses - MS5611
- 5 pulses - gyro I2C bus locked
- 6 pulses - mag/baro I2C bus locked
Currently UART4, UART5 and ADC is not implemented.
External SPI flash is disabled in default build.
SBUS input in UART1 is not working.
UART1 is RX only