EN Vehicle Speed Camera Virtual Distance Time (6.0 s)

Vehicle Speed Camera Virtual Distance Time (6.0 s)

Menu: Driving > Speed & Decel > Speed Camera

---

Vehicle Speed Camera Virtual Distance Time (6.0 s)

VehicleSpeedCameraDistanceTime

Applies only when external navigation is disconnected. While external navigation is connected, stock navigation is excluded even without a current guidance item. Creates a virtual deceleration distance when the vehicle sends only a speed-camera enforcement speed without distance. The stored value uses 0.1-second units: 60 means 6.0 s and 62 means 6.2 s. Virtual distance (m) = enforcement speed (km/h) × configured time (s), so 62 produces 310 m at 50 km/h. A smaller value shortens the virtual distance, so deceleration may begin earlier or more strongly. Changes take effect within about one second while driving. Also applies on supported CAN-FD vehicles when no nearby distance matches the current warning. A new warning or limit change restarts the distance; once exhausted, the cap remains while the warning is active without repeatedly extending the virtual distance.

• Type: Number
• Default: 60
• Range: 10 ~ 200
• Step: 1
• Menu: Driving > Speed & Decel > Speed Camera

Behavior

While external navigation is connected, it is used exclusively even without a current guidance item. After disconnection or receive timeout is detected, stock navigation resumes according to its settings.

Computes a virtual distance when the vehicle supplies an enforcement speed without distance. Increasing the value lengthens that distance; decreasing it shortens the distance and can start deceleration earlier or more strongly. On supported CAN-FD vehicles, this also applies when no nearby distance matches the current warning. A new warning or limit change starts a fresh distance, which decreases with travel. Once exhausted, the cap remains while the warning is active without repeatedly extending the virtual distance.

Usage

Check the external-navigation connection together with the displayed event type and remaining distance.