Join GitHub today
GitHub is home to over 28 million developers working together to host and review code, manage projects, and build software together.Sign up
Clone this wiki locally
Spacewalk Installation Instructions
These are installation instruction for Spacewalk 1.1.
Spacewalk 1.0 installation instructions are available at HowToInstall10
- Outbound open ports 80, 443, 4545 (only if you want to enable monitoring)
- Inbound open ports 80, 443, 5222 (only if you want to push actions to client machines) and 5269 (only for push actions to a Spacewalk Proxy), 69 udp if you want to use tftp
- Storage for database: 128KB per client system + 64MB per channel
- Storage for packages (default /var/satellite): Depends on what you're storing; Red Hat recommend 6GB per channel for their channels
- 2GB RAM minimum, 4GB recommended
- Make sure your underlying OS up-to-date.
- If you use LDAP as a central identity service and wish to pull user and group information from it, see SpacewalkWithLDAP
Setting up Spacewalk repo
RPM downloads of the project are available through a yum repository
- http://spacewalk.redhat.com/yum/ - Binary RPMs
- http://spacewalk.redhat.com/source/ - Source RPMs and tarballs
To use this repository install spacewalk-repo with commands below:
Red Hat Enterprise Linux, CentOS
rpm -Uvh http://spacewalk.redhat.com/yum/1.1/RHEL/5/i386/spacewalk-repo-1.1-3.el5.noarch.rpm
rpm -Uvh http://spacewalk.redhat.com/yum/1.1/Fedora/12/i386/spacewalk-repo-1.1-3.fc12.noarch.rpm
rpm -Uvh http://spacewalk.redhat.com/yum/1.1/Fedora/13/i386/spacewalk-repo-1.1-3.fc13.noarch.rpm
If you want to use the nightly builds, add a .repo file pointing to the nightly repository:
cat > /etc/yum.repos.d/spacewalk.repo << 'EOF' [spacewalk] name=Spacewalk # RHEL 5 / CentOS 5 baseurl=http://koji.spacewalkproject.org/spacewalk/split/spacewalk-5E/server/spacewalk-5E-nightly/$basearch/os/ # Fedora 12 #baseurl=http://koji.spacewalkproject.org/spacewalk/split/spacewalk-f12/server/spacewalk-f12-nightly/$basearch/os # Fedora 13 #baseurl=http://koji.spacewalkproject.org/spacewalk/split/spacewalk-f13/server/spacewalk-f13-nightly/$basearch/os gpgkey=http://spacewalk.redhat.com/yum/RPM-GPG-KEY-spacewalk-2010 enabled=1 gpgcheck=0 EOF
NOTE: Nigthly repo contains developers snapshot and is not suitable in production environment.
Additional repos & packages
For Spacewalk on Fedora, a couple of additional dependencies are needed from jpackage. Please create the following yum repository before beginning your Spacewalk installation:
cat > /etc/yum.repos.d/jpackage.repo << EOF [jpackage] name=jpackage-f10 baseurl=http://mirrors.dotsrc.org/jpackage/6.0/fedora-10/free/ gpgkey=http://www.jpackage.org/jpackage.asc gpgcheck=1 EOF
Note: the dirs for f11 and f12 do not contain the rpms yet
Red Hat Enterprise Linux 5
Spacewalk requires a Java Virtual Machine with version 1.6.0 or greater. EPEL - Extra Packages for Enterprise Linux contains a version of the openjdk that works with Spacewalk. Other dependencies can get installed from EPEL as well. To get packages from EPEL just install this RPM:
BASEARCH=$(uname -i) rpm -Uvh http://download.fedora.redhat.com/pub/epel/5/$BASEARCH/epel-release-5-4.noarch.rpm
Please make sure you have only one java version installed. Otherwise you get error messeges like :
- " bad major version at off set=6" or
- "INFO: validateJarFile(/usr/share/tomcat5/webapps/rhn/WEB-INF/lib/jspapi.jar) - jar not loaded."
Follow the instructions for Red Hat Enterprise Linux 5 with the additions:
Necessary packages rhn-client-tools and rhnlib were removed from CentOS, they can be found in spacewalk-client repo. Setup it by installing spacewalk-client-repo package.
Import Redhat's RPM GPG key:
In order to get Spacewalk to run you need the Oracle client and an Oracle 10g database server. The easiest way to do this is to install Oracle XE and the Oracle Instant Client. Instructions on how to do this can be found on the Oracle 10g Express Edition Setup page.
If you install Spacewalk nightly on PostgreSQL, the Oracle bits are no longer needed. This is still not stable, and is generally not recommended.
There is an open bug 593402 that identifies the package cobbler-web as conflicting with Spacewalk's Taskomatic process. Until the issue is addressed, it is recommended that the cobbler-web package be removed from the Spacewalk server.
yum remove cobbler-web
Yum can also be configured to exclude that package in the future by adding the following entry to the main section in /etc/yum.conf:
vi /etc/yum.conf [main] .... exclude=cobbler-web
There is a workaround to be able to install cobbler-web and use it alongside Spacewalk. Instructions can be found here.
Just ask yum to install the necessary packages. This will pull down and install the set of RPMs required to get Spacewalk to run.
If you tend to use the Oracle backend:
yum install spacewalk-oracle
If you prefer the PostgreSQL backend:
yum install spacewalk-postgresql
Note: PostgreSQL support is in early development stage. You may want to take a look at the PostgreSQL page for further information.
Note: Your Spacewalk server should have a resolvable FQDN such as 'hostname.domain.com'. If the installer complains that the hostname is not the FQDN, do not use the --skip-fqdn-test flag to skip !
Also, this will not work unless the spacewalk account in the database has a password. You can set up a password by logging in to sqlplus with the sys account and using the command
where user_name = spacewalk. Don't use '#' (number sign/pound/hash) in your database password otherwise installation will fail.
Once the Spacewalk RPM is installed you need to configure the application, you can run:
An example session is as follows:
[root@fjs-0-02 yum.repos.d]# spacewalk-setup --disconnected * Setting up Oracle environment. * Setting up database. ** Database: Setting up database connection. DB User? spacewalk DB Password? DB SID? XE DB hostname? localhost DB port ? DB protocol [TCP]? ** Database: Testing database connection. ** Database: Populating database. *** Progress: ########################################################## * Setting up users and groups. ** GPG: Initializing GPG and importing key. ** GPG: Creating /root/.gnupg directory You must enter an email address. Admin Email Address? firstname.lastname@example.org * Performing initial configuration. * Activating Spacewalk. ** Loading Spacewalk Certificate. ** Verifying certificate locally. ** Activating Spacewalk. * Enabling Monitoring. * Configuring apache SSL virtual host. Should setup configure apache's default ssl server for you (saves original ssl.conf) y/n? y ** /etc/httpd/conf.d/ssl.conf has been backed up to ssl.conf-swsave * Creating SSL certificates. CA certificate password? Re-enter CA certificate password? Organization? Tito Puente Solutions Organization Unit [fjs-0-02.rhndev.redhat.com]? Email Address [email@example.com]? City? Raleigh State? NC Country code (Examples: "US", "JP", "IN", or type "?" to see a list)? US ** SSL: Generating CA certificate. ** SSL: Deploying CA certificate. ** SSL: Generating server certificate. ** SSL: Storing SSL certificates. * Deploying configuration files. * Update configuration in database. * Setting up Cobbler.. Cobbler requires tftp and xinetd services be turned on for PXE provisioning functionality. Enable these services (y/n, default = 'y')?y * Restarting services. Installation complete. Visit https://fjs-0-02.rhndev.redhat.com to create the Spacewalk administrator account.
Configuring Spacewalk with an Answer File
You can also configure spacewalk by using an answer file. To configure spacewalk by using an answer you just need to run the following
spacwalk-setup --disconnected --answer-file=<FILENAME>
An example answer file is as follows
admin-email = root@localhost ssl-set-org = Spacewalk Org ssl-set-org-unit = spacewalk ssl-set-city = My City ssl-set-state = My State ssl-set-country = US ssl-password = spacewalk ssl-set-email = root@localhost ssl-config-sslvhost = Y db-backend=oracle db-user=spacewalk db-password=spacewalk db-sid=xe db-host=localhost db-port=1521 db-protocol=TCP enable-tftp=Y
NOTE: If you do not supply a value or leave out a key you will be prompted to supply that answer
For Postgres you need to create something like this
admin-email = root@localhost ssl-set-org = Spacewalk Org ssl-set-org-unit = spacewalk ssl-set-city = My City ssl-set-state = My State ssl-set-country = US ssl-password = spacewalk ssl-set-email = root@localhost ssl-config-sslvhost = Y db-backend=postgresql db-name=spaceschema1 db-user=spaceuser db-password=spacewalk db-host=host db-port=5432 db-protocol=TCP enable-tftp=Y
spacewalk-setup is complete your application is ready to go!
Be sure to use the FQDN of the host when you connect.
Once you've made sure you can login to the Spacewalk web UI, you can then proceed to the next step: Uploading Content.
Spacewalk consists of several services. Each of them has its own init.d script to stop/start/restart. If you want manage all spacewalk services at once use