Skip to content

Export Nodes SourceIOFlexClampNode

REDxEYE edited this page Nov 20, 2026 · 1 revision

Flex clamp

Category: Flex rules · Node ID: SourceIOFlexClampNode

Flex clamp node

Limits a flex value to a range, so a combined expression cannot go below a minimum or above a maximum.

Inputs

Socket Type Multi-input Description
Value Flex expression No (one link, required) The value to clamp.

Outputs

Socket Type Description
Value Flex expression The clamped expression.

Properties

Control Meaning
Minimum Lower limit (default 0.0).
Maximum Upper limit (default 1.0). Must not be below Minimum.

Generated expression

min(max(<value>, <minimum>), <maximum>), e.g. min(max(smile, 0.0), 1.0). If Minimum equals Maximum the node outputs just that number and ignores the input (the input still must be connected).

Example workflow

Controller a → Flex arithmetic (Add) ← controller b; Value → Flex clamp (0..1) → Shape flex rule. The summed weight cannot exceed 1.

Caveats

  • Minimum greater than Maximum fails the export.
  • This only limits the expression; the controller's own slider range is set on the Flex controller.

Back to Export Nodes

Clone this wiki locally