Repository navigation
Export Nodes SourceIOSfmFingerNode
REDxEYE edited this page Nov 20, 2026
·
1 revision
Rigs one finger: an FK handle on every bone from root to tip plus a single curl slider that bends all joints at once.

Category: SFM rig. Node ID: SourceIOSfmFingerNode.
None.
| Socket | Type | Meaning |
|---|---|---|
| Constraint | SFM constraint socket | Link to Constraints on an SFM IK rig node (the same socket that takes SFM constraint nodes). |
| Property | Meaning |
|---|---|
| Name | Default index_R. Controls are rig_<name>_0, rig_<name>_1, … and the curl slider is rig_curl_<name>. Letters, digits and _ only. |
| Root bone | First finger bone; its control bends the finger root. |
| Tip bone | Last finger bone. Every bone on the path from root to tip gets a handle. Blank gives a handle for the root only. |
| Control group | SFM control group for the handles and slider. Blank uses RigExtra. |
| Curl axis | One of X, -X, Y, -Y, Z, -Z: the local axis of each finger bone that the curl rotates around, towards the palm. Check it by rotating a finger bone around that axis in Blender. |
| Curl angle | Degrees each joint bends with the slider at 1 (default 90, range -180…180). |
| Slider rest | Slider value of the modelled pose (default 0.2, range 0…0.99). Lower values bend the finger back. |
The slider changes by curl angle / (1 - slider rest) degrees per slider unit, so the modelled pose sits at Slider rest. Posing the individual handles adds to the curl.
- Add a finger node for each finger: Name
index_R, Root boneBip01_R_Finger1, Tip boneBip01_R_Finger12. - Test the curl direction by rotating one of the bones in Blender; choose the matching Curl axis (add the sign if it bends the wrong way, or use a negative Curl angle).
- Link every Constraint output to the rig's Constraints input.
- Finger names must be unique across fingers and FK chains.
- A finger bone cannot also be driven by another control.
- The curl axis must not be a zero vector (guaranteed by the choices) and the slider rest must be at least 0 and below 1.
- The tip bone must be a descendant of the root bone.
- Older graphs where fingers were linked to a separate Fingers input are migrated to Constraints when the file loads.
Back to Export Nodes.