Skip to content

Export Nodes SourceIOUnlitGenericVMTNode

REDxEYE edited this page Nov 20, 2026 · 1 revision

VMT UnlitGeneric

Builds an UnlitGeneric material (VMT): a full-bright, unlit surface with optional detail, additive/translucent blending, vertex colour/alpha and environment-map reflections.

VMT UnlitGeneric node

Inputs

Input VMT parameter Group Purpose
Base texture $basetexture Textures Diffuse/albedo colour. Alpha is used by $translucent, $alphatest and, unless a mask is linked, by $selfillum.
Detail texture $detail Textures Secondary texture tiled over the base. Blended according to Detail blend mode, Detail blend factor and Detail scale.
Environment mask $envmapmask Environment / Mask Mask that controls where the $envmap reflection is visible.
Self-illumination mask $selfillummask Surface / Alpha Mask for $selfillum glow. Without it the engine uses the base texture alpha.

All inputs are VTF sockets (single link each, not multi-input) and are optional: an unconnected input simply omits its VMT parameter. Each one accepts the output of a VTF Output node. You can also drag a Texture socket straight onto one of these inputs; SourceIO then inserts a VTF Output node for you, named <vmt path without .vmt>_<suffix>.vtf (albedo for $basetexture, otherwise the parameter name without $) with Normal map (linear) enabled for $bumpmap/$normalmap. Any other link type is removed. At export, a linked input that does not resolve to a VTF recipe raises " must resolve to a VTF Output recipe".

Outputs

Output Type Description
Material Material The rendered VMT text plus every VTF it references. Connect it to the Materials multi-input of a Source 1 model output (many materials allowed), or to its Skin families input (SourceIO then inserts a Skin family node that lists this VMT's name).

Properties

Header controls (all VMT nodes)

Control Meaning
Blender material (mat) The Blender Material this VMT replaces. Required: the node raises "VMT requires a Blender Material binding" without it. Mesh slots that use this Blender Material are exported under this VMT's file name; a mesh slot whose Blender Material has no linked VMT node stops the export with "No linked VMT bound to ... slot".
VMT path under materials (vmt_path) Output path of the .vmt, relative to the game's materials/ folder (default models/props/material.vmt). A leading materials/ and the .vmt extension are normalised; absolute paths, .., : and quotes are rejected. The file stem becomes the material name in the QC, and the folder is added to $cdmaterials automatically.
Sync VMT to disk (button) Writes only this node's .vmt to the game root of every Source 1 model output the node feeds, without encoding textures (VTF paths are still referenced). Errors if the node is not connected to a model output.

Each group below is a collapsible box in the node. Textures, Surface / Alpha, Normal and Shader-specific start expanded, the rest start collapsed. Collapsing a group also hides that group's unlinked texture inputs, so open the group to see and connect them; linked inputs always stay visible.

Textures

Shows the link state of the texture inputs plus the detail controls:

Control Meaning
$detailblendfactor Detail blend factor (default 1). Written only when it is not 1.
$detailscale Detail texture scale (default 1). Written only when it is not 1.
$detailblendmode Integer detail blend mode (default 0, the engine default). Written only when it is not 0; the meaning of each mode is defined by the Source engine.

Surface / Alpha

Control Meaning
$model Written as "$model" "1" when enabled (default on). Required for materials used on models.
$translucent Written as 1 when enabled. Alpha-blended transparency from the base texture alpha, so the base VTF needs an alpha-capable format (DXT5, RGBA8888, ...).
$alphatest Written as 1 when enabled; pixels are cut out by alpha.
$alphatestreference Only shown while $alphatest is on (0-1, default 0.5). Alpha cut-off, written as $alphatestreference.
$nocull Written as 1 when enabled: draw both faces of every polygon.
$selfillum Written as 1 when enabled: the surface glows independent of lighting. Uses the Self-illumination mask if linked, otherwise the base alpha (engine behaviour).
$color2 RGB tint (0-1). Written as $color2 [r g b] only when it differs from white.
$additive Written as 1 when enabled: colour is added to what is behind it.
$vertexcolor Written as 1 when enabled: multiply by mesh vertex colour.
$vertexalpha Written as 1 when enabled: multiply alpha by mesh vertex alpha.
$alpha Overall opacity (0-1, default 1). Written only when not 1. Takes effect together with $translucent.

UV transforms

One toggle per texture slot; when a toggle is on, scale, rotation and translation appear and the transform is written as center .5 .5 scale <sx> <sy> rotate <rotation> translate <tx> <ty> (the rotation value is written unchanged; VMT rotation is in degrees). Defaults: scale (1, 1), rotation 0, translation (0, 0).

Toggle Applies to
$basetexturetransform Base texture
$detailtexturetransform Detail texture

Environment / Mask

Also lists the link state of Environment mask.

Control Meaning
$envmap Environment map name (for example env_cubemap or a cubemap VTF path). Empty by default; nothing in this group is written while empty.
$envmaptint RGB tint of the reflection (default white). Written only with a non-empty $envmap and when not white.
$envmapcontrast Reflection contrast (default 0). Written only when $envmap is set and the value is not 0.
$envmapsaturation Reflection saturation (default 1). Written only when $envmap is set and the value is not 1.

Raw / Proxies

Control Meaning
Ordered raw VMT KV entries (raw_parameters) A Blender Text datablock whose content is KeyValues entries copied into the shader block verbatim and in order (duplicates and nested blocks are kept). Use it for any VMT parameter the node has no control for, e.g. "$surfaceprop" "metal". Parse errors abort the export; an entry that repeats a generated parameter (including a texture key of a linked input) is rejected as a conflict.
Proxy KV entries (proxy_parameters) A Blender Text datablock holding entries for the Proxies block. Each entry must itself be a named KeyValues block (for example AnimatedTexture { ... }), otherwise the export fails with "Each Proxies entry must be a named KeyValues block".

How it works

When a Source 1 model output builds the graph, this node produces one VMT: a "<shader>" block holding, in order, the texture parameters of linked inputs, then $model, $translucent, $alphatest, $nocull, $selfillum, $phong (those that are enabled), $alphatestreference, phong values, $envmap, $color2, the other typed parameters (detail, tint, UV transforms, shader-specific values), your raw entries and finally a Proxies block. The shader name is written in lower case. Parameters equal to their default are skipped so the file stays minimal. Every linked VTF is encoded by its VTF Output node and written to materials/<vtf path>.vtf next to the VMT under the model output's game root; two textures that map to the same path with different bytes, or two materials with the same VMT path and different text, abort the export.

Shader behaviour. UnlitGeneric ignores scene lighting: the base texture is drawn at full brightness, optionally modulated by vertex colour/alpha, $color2 and $alpha. It suits sprites, screens, holograms, glow cards and any surface that must not be shaded. It has no normal map or phong support, which is why this node has no Normal or Phong group.

Texture and colour-space behaviour. The node does not convert colour. Because nothing is lit, the exact pixel values of the base texture are what reach the screen; export it through a VTF Output with the default Linear space option (values stored unchanged, no sRGB flag) unless you intentionally chose to convert.

Example workflow

  1. Add an Image Source (or External Texture Source) and connect it to Base texture; configure the auto-inserted VTF Output (DXT5 if the texture has alpha).
  2. In Surface / Alpha enable $translucent for alpha blending, or $additive for glow effects; set $alpha for an overall fade.
  3. Choose the Blender material and VMT path under materials.
  4. Connect Material to the model output's Materials input and export.

Caveats

  • Self-illumination is rarely useful on an unlit material (it is already full-bright), but the Self-illumination mask socket and $selfillum are still written if you use them.
  • $alpha only matters together with $translucent (or $additive).
  • UV transforms exist for the base and detail slots only.
  • Environment mask only has an effect when an $envmap is set.

Export Nodes

Clone this wiki locally