Skip to content

Export Nodes SourceIOFlexCorrectiveRuleNode

REDxEYE edited this page Nov 20, 2026 · 1 revision

Corrective flex rule

Category: Flex rules · Node ID: SourceIOFlexCorrectiveRuleNode

Corrective flex rule node

Drives a corrective shape key – a key that should only appear when several other poses are active together (for example a lip-corner fix when both smile and jaw open are on). The shape's weight is the product of all its driver values, so it is zero as soon as any driver is zero.

Inputs

Socket Type Multi-input Description
Drivers Flex expression Yes Two or more values: controller Value outputs or any expression node outputs. Each link is one factor. Fewer than two links is an error. The node label shows "Weight = product of N drivers".

Outputs

Socket Type Description
Rule Flex rule Link to the Flex rules collector's Rules input.

Properties

Control Meaning
Mesh object Mesh object that owns the corrective shape key.
Shape key The corrective shape key to drive.
Wrinkle scale Wrinkle-map scale for this key (0 = none).
Status line "Orphaned" / "Ambiguous change" when the shape key was deleted or could not be matched; retarget and sync.

There is no Use shape key range option on this node.

Generated expression

The exported expression is the drivers joined by *, each in parentheses, in link order: e.g. (smile) * (jaw_open).

If any driver is a stereo controller, the rule is split at export into generated shape.L and shape.R halves, driven by the left_/right_ copies of the controllers, so the corrective only follows the matching side of that controller.

Example workflow

  1. Create controllers smile and jaw_open, plus normal shape rules for their own keys.
  2. Add a Corrective rule: Mesh object = face, Shape key = smile_jaw_fix.
  3. Link both controller Value outputs into Drivers (one link each); Rule → collector Rules.

Caveats

  • Correctives are never inferred; a corrective key without this node gets only the automatic single-controller behaviour.
  • Drivers can be expressions, e.g. an Flex clamp output to limit a controller's contribution.
  • A Blender driver preview multiplies the same drivers; the 255-byte driver expression limit applies, so very many drivers may be refused.

Back to Export Nodes

Clone this wiki locally