Repository navigation
EN CCNC cluster stock style display
Menu: Vehicle & Hardware > CANFD·HDA
CcncClusterDisplay
0: Off (default), 1: On. 0 turns off only the items below; the HDP gap display / popup, side box -> grey car and standstill steering icon fixes always apply, whatever this is set to. Applies to Hyundai/Kia/Genesis CAN-FD cars on camera SCC with openpilot longitudinal control (HyundaiCameraSCC 1 or 2) once the camera's CCNC cluster frame 0x161 (0x162 for the HDP icon) has been received. openpilot re-sends those frames and shows its state on the cluster the way the stock HDA2 display does. Applies within about 1 s. - Lane lines: a line whose model probability stays under 0.08 for over 1 s and that the camera does not see either is not drawn (drawn again from 0.12; an orange line stays). IONIQ 9 / EV9 keep the previous lane display. - Dashed: a line the camera reports as dashed is drawn dashed (IONIQ 5 PE, Azera / Grandeur GN7 and EV4). - Lane highlight by steering state while steering: laneless green, lane mode sky blue, steering angle error for 0.3 s yellow, steering limit red, green during a lane change. Not changed while a lane line is hidden. - Lead ring on a visible lead: blue at the gap openpilot keeps while cruising, white when not cruising. - Popups: the stock popup for 2 s when cruise is engaged or released. - Alert texts: some openpilot alerts (speed too high, steering / SCC unavailable, steering limit, CAN / sensor faults) show as stock texts. The steering-limit text (check surroundings) also plays the stock double chime for 1 s. Texts that the DBC does not list show only on the IONIQ 5 PE, Azera / Grandeur GN7 and EV4. - HDP icon while cruise or steering is active (IONIQ 5 PE, Azera / Grandeur GN7 and EV4).
- Type: Toggle
-
Default:
0 -
Range:
0~1 - Menu: Vehicle & Hardware > CANFD·HDA
Enabling this shows lane visibility, steering state, target-gap rings, engagement messages and selected alerts on the CCNC cluster. Dashed lines and the HDP icon follow the supported-car lists.
This applies to camera-SCC CAN-FD with openpilot longitudinal control and requires received stock cluster frames.
문서 기준: ajouatom/openpilot의 carrot-wip 브랜치 · 내용이 현재 화면과 다르면 문서 작성 가이드를 참고해 알려주세요.
- 소개
- 처음 시작하기
- 깜빡이 제어 장치
- 사용 설명서
- CarrotAssist 음성 도우미
-
설정 이해하기
-
전체 설정
- 주행 제어
- 시작·오토
- Tesla 전용
- 버튼·프리셋
- 차량 조향
- ONNX 차선·BSD
- 중앙 보정
- 조향감
- 차로 변경 (자동 턴)
- 레인모드
- 고급 토크
- 토크 계수
- 조향 제한
- 속도·감속
- 과속카메라
- 후면단속 통과 후 유지 거리(m)
- 과속카메라감속 완료 시간(6초)
- 네비게이션감속모드(2)
- 차량 내비 CAN 감속 적용 모드
- 차량 내비 어린이보호구역 30km/h 제한
- 차량 내비 감속 중지 요청
- 감속 중지: 박스형 카메라
- 감속 중지: 이동식 단속 구간
- 감속 중지: 과속방지턱
- 감속 중지: 과속카메라 종류 미탐지 건 [실험]
- 감속 중지: 경고 조기 시작 보정 [실험]
- 차량 내비 구간단속 평균속도 제어
- 차량 수신 과속카메라 감속(항상 적용)
- 차량 과속카메라 가상거리 시간(6.0초)
- 과속카메라 감속율 x0.01m/s^2(120)
- 네비알림 카운트다운 방법
- 과속카메라 제한속도적용율(105)%
- 제한속도
- 방지턱
- 커브·턴
- 신호감지
- 과속카메라
- 크루즈·차간
- 가속 성향
- 정차·재출발
- 가감속 튜닝
- 차간거리
- 당근 크루즈
- 차량·하드웨어
- 현대·기아
- 깜박이 제어
- CANFD·HDA
- 레이더
- 운전자 모니터링
- 차량 보조
- 기기 하드웨어
- 화면 표시
- 정보 표시
- 경로 표시
- 밝기·주행화면
- 외부 HUD
- 시스템
- 녹화·전원
- 녹화·전원
- 카메라
- 네트워크·지도
- 사운드
- 소프트웨어
- 녹화·전원
- 주행 제어
- 버튼·프리셋 상세
- 속도·감속 상세
- 크루즈·차간 상세
- 레이더트랙·코너레이더
- 차로 변경 이해하기
-
전체 설정
- Carrot Web
- 튜닝 입문
- 자주 묻는 질문
- 문서 작성 가이드