Skip to content

EN Panda SPAS Send Mode

ajouatom edited this page Nov 16, 2026 · 2 revisions

Panda/SPAS Send Mode

Menu: Vehicle & Hardware > Indicator Control > Output Device


Panda/SPAS Send Mode

CanfdBlinkerKickMode

How Panda/SPAS Indicator Output sends its blinker command. Default 1. 0: only after the parking ECU answers the pause request and its stock SPAS frames stop; no answer, no lamp (the IONIQ 5 PE did not answer). 1: piggyback. If the ECU does not answer, panda sends our SPAS frame right behind each stock SPAS frame, so the same id never starts at the same moment and does not collide. If the ECU answers, same as 0. - Cars and wiring: the same as Panda/SPAS Indicator Output.

  • Type: Toggle
  • Default: 1
  • Range: 0 ~ 1
  • Menu: Vehicle & Hardware > Indicator Control > Output Device

Behavior

The acknowledgement mode requires the parking ECU to reply and its stock stream to become quiet. The fallback mode sends immediately after a fresh stock frame through Panda when the ECU does not reply.

Usage

This applies to supported vehicles with Panda/SPAS Indicator Output enabled. Both modes require exclusive ownership shared with USB and BLE output.

CarrotPilot Wiki


Clone this wiki locally