Namespace Profile And Diagnostic Utility Reference

Namespace, Profile Persistence and Diagnostic Utilities

Source-verified 2026-06-21 against then-current master cf2a6d6a4; current origin/master is 0139a346, so recheck cited paths before current-head claims. Paths relative to Missions/[55-2hc]warfarev2_073v48co.chernarus/ unless noted. Arma 2 OA 1.64.

This page documents six platform-layer utility functions registered during common initialisation. Contributors frequently treat them as standard SQF builtins; they are not. Each carries non-obvious behaviour that has caused subtle bugs.

---

Registration

All six functions are compiled in Common/Init/Init_Common.sqf (executed via ExecVM from initJIPCompatible.sqf line 217). WFBE_CO_FNC_LogContent is compiled earlier, directly in initJIPCompatible.sqf line 37, so it is available before any other function.

Global variable	Source file	Registration site	Registration line
GetNamespace	Common/Functions/Common_GetNameSpace.sqf	not found in Init_Common — used as bare global	(see note below)
SetNamespace	Common/Functions/Common_SetNamespace.sqf	not found in Init_Common — used as bare global	(see note below)
WFBE_CO_FNC_LogContent	Common/Functions/Common_LogContent.sqf	initJIPCompatible.sqf	38
GetSleepFPS	Common/Functions/Common_GetSleepFPS.sqf	Common/Init/Init_Common.sqf	45
GetAIDigit	Common/Functions/Common_GetAIDigit.sqf	Common/Init/Init_Common.sqf	24
WFBE_CO_FNC_GetProfileVariable	Common/Functions/Common_GetProfileVariable.sqf	Common/Init/Init_Common.sqf	Deleted — removed in b76x dead-code cleanup (compiled but zero callers); not present on master
WFBE_CO_FNC_SetProfileVariable	Common/Functions/Common_SetProfileVariable.sqf	Common/Init/Init_Common.sqf	172
WFBE_CO_FNC_SaveProfile	Common/Functions/Common_SaveProfile.sqf	Common/Init/Init_Common.sqf	171

Note on GetNamespace / SetNamespace: Both source files (Common/Functions/Common_GetNameSpace.sqf and Common/Functions/Common_SetNamespace.sqf) were deleted from master in commit add019614 ('b76x: remove dead code') as never-compiled orphans. Neither function exists in master. Only a commented-out reference survives in Client/Init/Init_Client.sqf:871. Do not reference or call these functions on master.

Profile functions are version-gated. WFBE_CO_FNC_GetProfileVariable, WFBE_CO_FNC_SetProfileVariable, and WFBE_CO_FNC_SaveProfile are compiled only when ARMA_VERSION >= 162 && ARMA_RELEASENUMBER > 97105 || ARMA_VERSION > 162 (Common/Init/Init_Common.sqf:169-173). All callers guard against this with if !(isNil 'WFBE_CO_FNC_SetProfileVariable') then {...}.

---

Logging — WFBE_CO_FNC_LogContent

Overview

Diagnostic sink for all mission subsystems. Every init file, server loop, and client function routes structured log output through this one function. All output is silently discarded unless LOG_CONTENT_STATE == "ACTIVATED".

Activation gate

LOG_CONTENT_STATE is initialised to "" at initJIPCompatible.sqf:6, then conditionally overwritten via a preprocessor branch (initJIPCompatible.sqf:9-13):

#ifdef WF_LOG_CONTENT
    LOG_CONTENT_STATE = "ACTIVATED";
#else
    LOG_CONTENT_STATE = "NOT ACTIVATED";
#endif

Headless clients always activate logging regardless of the build flag (initJIPCompatible.sqf:59):

if (isHeadLessClient) then {LOG_CONTENT_STATE = "ACTIVATED"};

The current state is written to the RPT at mission start (initJIPCompatible.sqf:32).

Log level

WFBE_LogLevel is set to 0 in initJIPCompatible.sqf:38:

WFBE_LogLevel = 0; //--- Logging level (0: Trivial, 1: Information, 2: Warnnings, 3: Errors).

At level 0 every call whose _logLevel is >= 0 (i.e. all of them, since the optional parameter defaults to 0) reaches diag_log. In practice the gate is the LOG_CONTENT_STATE string check, not the level filter.

Signature

Parameter	Index	Type	Notes
_logType	0	String	Free-form category tag, e.g. "INITIALIZATION", "INFORMATION", "WARNING", "TRIVIAL"
_logContent	1	String	Message body; typically a Format[...] expression
_logLevel	2	Number	Optional; defaults to 0 if omitted (Common/Functions/Common_LogContent.sqf:14)

Return: nothing (side-effect only).

Output format (Common/Functions/Common_LogContent.sqf:16):

[WFBE (<logType>)] [frameno:<N> | ticktime:<T> | fps:<F>] <logContent>

Source

Common/Functions/Common_LogContent.sqf (17 lines):

if (LOG_CONTENT_STATE == "ACTIVATED") then {
    Private ["_logContent","_logLevel","_logType"];

    _logType = _this select 0;
    _logContent = _this select 1;
    _logLevel = if (count _this > 2) then {_this select 2} else {0};

    if (_logLevel >= WFBE_LogLevel) then {
        diag_log Format["[WFBE (%1)] [frameno:%2 | ticktime:%3 | fps:%4] %5",
            _logType, diag_frameno, diag_tickTime, diag_fps, _logContent]
    };
};

Typical call patterns

// No level argument — fires at any WFBE_LogLevel value
["INITIALIZATION", "Init_Common.sqf: Functions are initialized."] Call WFBE_CO_FNC_LogContent;
// Common/Init/Init_Common.sqf:163

// With Format — typical init breadcrumb
["INFORMATION", Format ["Init_Boundaries.sqf: Boundaries [%1] found for island [%2]",
    _boundariesXY, worldName]] Call WFBE_CO_FNC_LogContent;
// Common/Init/Init_Boundaries.sqf:29

Debugging caveat

If WF_LOG_CONTENT is not defined at build time, the entire body of every Call WFBE_CO_FNC_LogContent is a no-op evaluated at the outer if check. Developers who add new Call WFBE_CO_FNC_LogContent lines and see no RPT output must rebuild with the WF_LOG_CONTENT preprocessor define or connect as/via a Headless Client.

---

Namespace Read — GetNamespace

Signature

Parameter	Type	Notes
_this (caller left-hand)	String	Variable name to read from missionNamespace

Return: the value stored under _variable in missionNamespace, or nil if not set.

Call form: _variable Call GetNamespace (bare-name style, not WFBE_CO_FNC_*).

Source

Common/Functions/Common_GetNameSpace.sqf (4 lines):

Private ['_variable'];

_variable = _this;

missionNamespace getVariable _variable

Usage

Read-only wrapper for missionNamespace getVariable. Callers use it when the variable name is itself stored in a string (common in the team/faction data model):

_team = ((Format["WFBE_%1TEAMS",str _side]) Call GetNamespace) select (_ID - 1);
// Common/Functions/Common_GetClientTeam.sqf:6

The commented-out line in Client/Init/Init_Client.sqf:562 shows an older calling pattern that was never removed:

// [player, Format ["WFBE_%1DEFAULTWEAPONS",sideJoinedText] Call GetNamespace, ...] Call EquipLoadout;

---

Nil-Safe Namespace Write — SetNamespace

Signature

Parameter	Index	Type	Notes
_variable	0	String	Variable name to write in missionNamespace
_value	1	Any	Value to store
_override	2	Bool	Optional; defaults to false

Return: nothing.

Call form: [_variable, _value] Call SetNamespace or [_variable, _value, true] Call SetNamespace.

Source

Common/Functions/Common_SetNamespace.sqf (15 lines):

Private ['_get','_override','_variable','_value'];

_variable = _this select 0;
_value = _this select 1;
_override = if (count _this > 2) then {_this select 2} else {false};

//--- BIS Bug, typename doesn't work properly with nil.
if !(_override) then {
    _get = _variable Call GetNamespace;
    if (isNil '_get') then {
        missionNamespace setVariable [_variable,_value];
    };
} else {
    missionNamespace setVariable [_variable,_value];
};

Nil-safe semantics — critical detail

Without the third argument (or with _override = false), SetNamespace only writes the value if the variable is currently nil. If the variable already holds any value, the call is silently discarded. This is the intended initialisation-safe pattern: it sets a default without overwriting an already-initialised value.

To force an unconditional write, pass true as the third argument:

[_variable, _value, true] Call SetNamespace;  // always writes
[_variable, _value] Call SetNamespace;         // writes only if nil (default)

The comment //--- BIS Bug, typename doesn't work properly with nil. explains why isNil '_get' is used rather than a typename check — typename nil is unreliable in Arma 2 OA.

---

Profile Persistence

Three functions form the profile persistence layer. They are only available on builds running ArmA 2 OA build > 97105 (condition: ARMA_VERSION >= 162 && ARMA_RELEASENUMBER > 97105 || ARMA_VERSION > 162, Common/Init/Init_Common.sqf:169). All write to the player's profileNamespace, which survives between sessions.

WFBE_CO_FNC_GetProfileVariable

Parameter	Index	Type	Notes
_var	0	String	profileNamespace key
_default	1	Any	Returned if the key is not set

Return: the stored value, or _default.

Source (Common/Functions/Common_GetProfileVariable.sqf:13):

profileNamespace getVariable [_var, _default]

WFBE_CO_FNC_SetProfileVariable

Parameter	Index	Type	Notes
_var	0	String	profileNamespace key
_value	1	Any	Value to store

Return: nothing. Does not call saveProfileNamespace — callers must follow up with WFBE_CO_FNC_SaveProfile to persist to disk.

Source (Common/Functions/Common_SetProfileVariable.sqf:13):

profileNamespace setVariable [_var, _value]

WFBE_CO_FNC_SaveProfile

No parameters. Calls saveProfileNamespace (Common/Functions/Common_SaveProfile.sqf:5).

Call this after one or more WFBE_CO_FNC_SetProfileVariable calls, not after each individual set. Callers batch the writes and call SaveProfile once:

if !(isNil 'WFBE_CO_FNC_SetProfileVariable') then {
    ['WFBE_PERSISTENT_CONST_VIEW_DISTANCE', _currentVD] Call WFBE_CO_FNC_SetProfileVariable;
    _need_save = true
};
// ... more sets ...
if !(isNil 'WFBE_CO_FNC_SaveProfile') then {Call WFBE_CO_FNC_SaveProfile};
// Client/GUI/GUI_Menu_Team.sqf:193, 214

Profile keys in use

Key	Type	Written by	Loaded by
WFBE_PERSISTENT_CONST_VIEW_DISTANCE	Number	GUI_Menu_Team.sqf:193	Client/Init/Init_ProfileVariables.sqf:9
WFBE_PERSISTENT_CONST_TERRAIN_GRID	Number	GUI_Menu_Team.sqf:197	Client/Init/Init_ProfileVariables.sqf:37
WFBE_TARGET_FPS	Number	Common_AdjustViewDistance.sqf:39,59	Client/Init/Init_ProfileVariables.sqf:19
WFBE_HIGH_CLIMBING_DEFAULT_ENABLED	Bool	GUI_Menu_Team.sqf:176	Client/Init/Init_ProfileVariables.sqf:28
WFBE_PERSISTENT_<side>_GEAR_TEMPLATE	Array	Client_UI_Gear_SaveTemplateProfile.sqf:94 (via profileNamespace setVariable)	Client/Init/Init_ProfileVariables.sqf:48

All profile reads in Init_ProfileVariables.sqf apply a typeName sanity check before applying the value, guarding against corrupted or cross-version profile data.

---

FPS-Adaptive Sleep — GetSleepFPS

Signature

Parameter	Type	Notes
_this (caller left-hand)	Number	Base sleep delay in seconds

Return: Number — the adjusted delay to pass to sleep.

Call form: _delay Call GetSleepFPS (bare-name style).

Source

Common/Functions/Common_GetSleepFPS.sqf (10 lines):

Private ["_delay"];

_delay = _this;

if (diag_fps > 15) exitWith {_delay};
if (diag_fps <= 15 && diag_fps > 10) exitWith {_delay * 0.85};
if (diag_fps <= 10 && diag_fps > 7) exitWith {_delay * 0.75};
if (diag_fps <= 7 && diag_fps > 5) exitWith {_delay * 0.70};
if (diag_fps <= 5) exitWith {_delay * 0.50};

_delay

FPS threshold table

diag_fps range	Multiplier applied	Resulting delay
> 15	1.00 (passthrough)	_delay
<= 15 and > 10	0.85	15% reduction
<= 10 and > 7	0.75	25% reduction
<= 7 and > 5	0.70	30% reduction
<= 5	0.50	50% reduction

Design rationale

Under server load the diag_fps metric falls. Shorter sleep intervals allow server loops to process more work per real-time second, partially compensating for performance degradation. The function is called from two sites: Server/FSM/updateresources.sqf:137 (economy income loop) and Client/Module/AFKkick/monitorAFK.sqf:29 (AFK polling loop, base interval 60 s). The server call:

_awaits = (_ii) Call GetSleepFPS;
sleep _awaits;

Where _ii is missionNamespace getVariable "WFBE_C_ECONOMY_INCOME_INTERVAL" (Server/FSM/updateresources.sqf:4).

Note

GetSleepFPS reads diag_fps at call time, which is the instantaneous frame rate of the local machine. On a dedicated server diag_fps reflects server frame rate, not any connected client's rate. The adaptive correction is a heuristic, not a guaranteed performance floor.

---

AI Unit Name Parser — GetAIDigit

Signature

Parameter	Type	Notes
_this (caller left-hand)	Object	The unit to classify

Return: String — "Leader" if the unit leads its group, otherwise the numeric suffix extracted from the unit's display name after the : character, or "0" if no suffix is found.

Call form: _unit Call GetAIDigit (bare-name style).

Source

Common/Functions/Common_GetAIDigit.sqf (20 lines):

Private ["_i","_split","_unit","_yield"];

_unit = _this;

if (_unit == leader (group _unit)) exitWith {"Leader"};

_split = toArray(str _unit);

_find = _split find 58;   // ASCII 58 = ':'
_yield = [];

if (_find != -1) then {
    for '_i' from (_find+1) to count(_split)-1 do {
        if ((_split select _i) == 65 || (_split select _i) == 32) exitWith {};
        _yield = _yield + [_split select _i];
    };
};

if (count _yield == 0) exitWith {"0"};

toString(_yield)

Logic detail

1. If _unit is the leader of its group, return "Leader" immediately.
2. Convert str _unit (the display name) to an ASCII array with toArray.
3. Find the colon character (ASCII 58, :) in the array.
4. Extract characters after : up to but not including A (ASCII 65) or space (ASCII 32).
5. Convert the collected byte array back to a string with toString.

The extraction loop breaks on A (ASCII 65) because ArmA unit names commonly end with a letter/rank suffix after the numeric digit. If no colon is found, or if nothing follows it, returns "0".

Note: _find is assigned without Private declaration (Common/Functions/Common_GetAIDigit.sqf:9). In Arma 2 OA this leaks _find into the calling scope as a script-local variable, which is harmless in practice but is a latent hygiene issue.

Usage

Called from Common/Init/Init_Unit.sqf:235 when creating the map marker label for a unit in the player's group:

_txt = (_unit) Call GetAIDigit;
// Common/Init/Init_Unit.sqf:161

The result becomes the marker text displayed on the map for player-group AI members.

---

Continue Reading

• Variable-And-Naming-Conventions — covers the WFBE_CO_FNC_* / WFBE_SE_FNC_* / WFBE_CL_FNC_* naming convention and bare-name legacy globals
• Hosted-Server-FPS-Loop-Sleep — the server FSM loop that calls GetSleepFPS in context
• Gear-Template-Profile-Filter — the gear template flow that drives SetProfileVariable / SaveProfile calls
• Networking-And-Public-Variables — missionNamespace variable broadcast patterns that complement GetNamespace / SetNamespace
• Function-And-Module-Index — full index of all compiled function variables