Skip to content
github-actions[bot] edited this page Nov 15, 2026 · 4 revisions

Last reviewed: 2026-11-14

Designing printable cases, adapters, mounts, replacement parts and new gear for field and lab hardware

Part of the ULTIMATE CYBERSECURITY MASTER GUIDE

CAD Printing Status

Navigate: Main Guide ยท Start Here ยท Specialized Topics ยท All Documentation

๐ŸŽฏ Purpose

Security work runs on small, awkward hardware: handheld RF tools, SDRs, dev boards, GPS modules, antennas and battery packs that never come with the mount, cradle or adapter you need. This section collects the CAD workflows used to design those parts in-house, with an emphasis on mocking up the real hardware first so designs fit on the first print.

๐Ÿ’ก Why CAD Skills & a Capable 3D Printer Belong Together

A 3D printer on its own mostly prints other people's files. Pair it with the ability to design, and it becomes a small in-house workshop. You stop asking "does anyone sell a part for this?" and start asking "what are the dimensions?"

Capability What It Looks Like In Practice
๐Ÿ”ง Fix what breaks Snapped belt clips, lost battery doors, cracked cases, worn knobs, missing port covers and dust plugs, broken cable strain reliefs. Measure the original (or the pieces), model it, print it.
โ™ป๏ธ Replace what you can't buy Discontinued or proprietary plastic parts, odd one-off brackets, spares for gear you depend on in the field. Keep the design file and you can print another one any time.
๐Ÿ›ก๏ธ Protect your gear Fitted cases, bumpers, sleeves, screen guards, connector covers and antenna caps sized to your device, not a generic one.
๐Ÿงท Mount & organize Brackets, rail and tripod adapters, desk and vehicle mounts, cable guides, pegboard and drawer inserts, labeled bit and SD-card holders.
๐Ÿงฐ Make the tools you need Jigs and alignment fixtures, soldering and probe holders, test-clip guides, drill templates, gauges and spacers for repeatable work.
๐Ÿš€ Expand what a device can do Add-on pods for GPS, extra radios or batteries, SMA antenna mounts, cooling ducts, button extenders, and the kind of T-Embed + GPS cradle built in the tutorial.
๐Ÿ’ญ Build your own ideas Go from a sketch on a napkin, born of inspiration or necessity, to a physical prototype the same day. Revise it in minutes and reprint.

Why parametric (code-based) CAD helps with this: a model driven by named measurements (dev_width, fit_gap, wall) is easy to adjust when the first print is 0.3 mm tight, to reuse for the next device, and to share so others can adapt it to their hardware. Mockups and clash checks (how) cut down the "print, test, reprint" loop that wastes time and filament.

What "capable printer" means here: dimensional accuracy you can rely on to a few tenths of a millimeter, a heated bed and materials beyond PLA (PETG, and ASA/ABS with an enclosure) for parts that flex, live in a hot car or sit outdoors, and optionally multi-material capability for labels and two-color inlays. Calibrate it, then use the test coupons to learn its real tolerances.

Caution

Know where printed plastic does not belong. Do not print parts whose failure could injure someone (load-bearing, climbing, vehicle-safety or pressure parts), parts that must insulate or enclose mains voltage, or anything near high heat or open flame unless the material and design are rated for it. Treat printed food-contact items with caution. Replacing a part on your own equipment is everyday repair; selling copies of someone else's design or branded part can raise license, trademark or patent issues.

Start Here

Resource What It Provides
OpenSCAD Design & Prototyping Guide Hub for the OpenSCAD track: fundamentals, project structure, mockups and fit checks, design for printing
OpenSCAD Fundamentals The language: primitives, extrusion, transforms, booleans, modules, modifiers
Project Structure & Parameters Layout, Customizer, libraries, parameter sets, command-line export
Mockups & Fit Checks Modeling devices, PCBs, connectors and cables; clash tests; test coupons
Tutorial: T-Embed + GPS Cradle Step-by-step build with SMA bulkhead, cable routing, PCB latches and snap lid
Design for 3D Printing Tolerances, orientation, snap-fit strain, inlays, materials, troubleshooting
Keyboard & Mouse Cheat Sheet Printable one-page reference of the most-used OpenSCAD shortcuts
Example: GPS Cradle Source Ready-to-render .scad files, parameter presets and check.sh

Typical Projects

Need Starting Point
Sleeve or holster for a handheld (T-Embed, Flipper-class tools, M5Stick) GPS cradle tutorial, Steps 3โ€“6
Antenna bracket or SMA/RP-SMA connector panel SMA hole with D-flat + sma_gauge coupon
Screwless PCB or module carrier PCB ledges & snap latches
Battery door, clip or other replacement part Fundamentals + Tolerances & Fits
Cable exit, strain relief or routing channel Cable notch + cable mockups

Note

Designs in this section are verified in software (they render, export and pass their clash tests and assertions). A design is only "print-verified" when a maintainer records the printer, material and result. Vendor dimensions are starting points; measure your own hardware.

See Also


โฌ…๏ธ Back to Master Index | ๐ŸŽฏ Role Navigation | Legal Notice


๐Ÿ“‘ All Pages in CAD

Open SCAD

Open SCAD / examples / gps cradle


๐Ÿ“‚ Folder: CAD | โœ๏ธ Suggest an edit | ๐Ÿ—บ๏ธ Browse by Topic

Clone this wiki locally