Skip to content

Printing and restocking the maintenance tags

pyrosyndicate edited this page Oct 30, 2026 · 1 revision

Printing and restocking the maintenance tags

How to reprint the plate, reprint the plastic cards, and reorder the paper tags.

For how people use the system day to day, see Equipment tagging (wiki: Equipment tagging).

The plate lives in the main space, under the Liver Bird light.


Downloads

Files will be uploaded to the repo shortly

File What Download
maintenance-tag-plate.3mf Multi-colour plate (body + lettering) for Bambu Studio TODO: wiki / drive link
maintenance-tag-plate.stl Single-colour plate mesh TODO: wiki / drive link
DoES-Asset-Git-Tags.3mf Red OUT OF SERVICE and yellow MAINTENANCE cards TODO: wiki / drive link

What you need

Item Role Source
Plate 3MF Holder for cards, paper tags, strings, pen maintenance-tag-plate.3mf (see Downloads)
Tags 3MF Red OUT OF SERVICE and yellow MAINTENANCE cards DoES-Asset-Git-Tags.3mf (see Downloads)
Paper gift tags 120 × 60 mm with elastic Disposable tags you write the issue number on Amazon (Link Below)
Pen Writing on paper tags Any biro / Sharpie that fits the pen channel

Amazon paper tags:

12 × 6 cm white paper gift tags with elastic

Spec to match: about 120 × 60 mm, white, writable, reinforced hole, elastic string (not wire).


Filament colours

Printed parts use two colours per job (body + raised text). An AMS (or AMS lite) makes this easy.

Plate (as printed)

Part Colour Approx hex Suggested buy (Bambu UK)
Plate body Blue #008BDA PLA Basic → Blue
Raised labels Orange #FF6A13 PLA Basic → Pumpkin Orange

The first print used Polymaker blue + Bambu orange PLA. Matching Bambu Lab colours is fine for reprints.

Plastic tags

Tag Body Text Suggested buy (Bambu UK)
OUT OF SERVICE Red White PLA Basic → Red + Jade White
MAINTENANCE REQUIRED Yellow Red PLA Basic → Sunflower Yellow + Red

Optional tougher material

If you want more knock resistance (workshop floor, heat, light outdoor use), print in PETG instead of PLA, same colour pairs:

Browse / bulk: Bambu Lab UK filament


Printer settings (DoES)

Setting Value
Printer Bambu Lab A1 (or P1S / X1C with the same profile)
Nozzle 0.4 mm
Process 0.20mm Standard
Layer height 0.2 mm
Supports None (plate and tags print flat)
Bed Textured / Smooth PEI as preferred for the material

Plate size is about 189 × 169 × 22 mm. It fits a full-size A1 / P1S bed. It does not fit an A1 mini.


Print a new plate

  1. Open maintenance-tag-plate.3mf in Bambu Studio.
  2. Confirm two parts on the plate:
    • Plate (body) → blue filament
    • Lettering (raised text) → orange filament
  3. Assign filaments in Objects if needed (body ≠ lettering).
  4. Slice with 0.20mm Standard.
  5. Print. No supports.
  6. Check labels read left to right from the pen end: OUT OF SERVICE, MAINTENANCE, PAPER, STRING, PEN.
  7. Put the plate back under the Liver Bird light and restock from the bays below.

Plate bays (what goes where)

Bay Stock
OUT OF SERVICE Red plastic cards
MAINTENANCE Yellow plastic cards
PAPER Blank paper gift tags (hole toward the string bay)
STRING Spare elastics (drop through the divider slot)
PEN Biro / Sharpie

Print more plastic tags

  1. Open DoES-Asset-Git-Tags.3mf in Bambu Studio.
  2. There are two colourways of the same keychain body:
    • Red body + white text → OUT OF SERVICE
    • Yellow body + red text → Maintenance Required / Proceed with Caution
  3. Assign filaments to body vs text parts (same pattern as the plate: second colour is the raised lettering).
  4. Slice at 0.20mm Standard, print flat, no supports.
  5. Print a small batch (the plate holds about 12 of each colour standing on edge).
  6. Return finished cards to the matching bay on the plate.

The plastic cards say GIT ISSUE NUMBER ON TAG. That number goes on the paper tag, not on the plastic.


Order more paper tags

  1. Buy another pack of 120 × 60 mm white paper tags with elastic (Amazon link at the top of this page).
  2. Keep elastics with the tags, or drop loose elastics into the STRING bay.
  3. Stack blanks in the PAPER bay with the reinforced hole toward the string side.
  4. If the pen is missing, replace it; open a shopping issue on somebody-should if stock keeps vanishing.

Restock checklist

When the plate looks empty:

  • Enough red OUT OF SERVICE cards
  • Enough yellow MAINTENANCE cards
  • Paper tags in the PAPER bay
  • Elastics in the STRING bay
  • Pen in the PEN channel
  • Plate still under the Liver Bird light

If you reprint anything, put a short note on somebody-should (or update this wiki) so the next person knows stock was topped up.


Rebuild from source (optional)

If you need to change the plate geometry, use generate.py or maintenance-tag-plate.scad in this project, then reprint from the new 3MF.

Related wiki: Equipment tagging (how to log an issue and hang a tag).

☝️ Filter all pages above!
(Full search available on the top of page)

WiFi: DoESLiverpool, password: decafbad00

or

Clone this wiki locally